S 684-005
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
49-27-06
ALL ú ú 01 Page 401 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
3. FUEL PUMP/FMU
22. FUEL PUMP DRAIN TUBE
2. WASHER
1. NUT
21. METERED FUEL
SUPPLY TUBE
20. FMU TO FLOW DIVIDER TUBE
18. NUT
17. ELECTRICAL
CONNECTOR, P4
16. LOOP CLAMP
14.
NUT
15.
FUEL RETURN TUBE (FROM FCOC)
A
5.
ACCESSORY GEARBOX
6.
PLAIN SEAL
7.
RETAINER RING
4. BOLT
8. LOOP CLAMP
13. BRACKET
9.
FUEL SUPPLY TUBE
10.
ELECTRICAL CONNECTOR, P3
12. BRACKET
11. FUEL PRESSURE TUBE (TO FCOC)
Fuel Pump Drive Spur Gearshaft Oil Seal - Removal/Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
49-27-06
ALL ú ú 02 Page 402 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
F58219
A
747-400 MAINTENANCE MANUAL
S 034-044
(2)
Disconnect these electrical connectors:
(a)
The P3 electrical connector (10) from the filter bypass indicator on the fuel pump/FMU assembly (3).
(b)
The P4 electrical connector (17) from the FMU electrical connector.
S 034-051
(3)
Disconnect these tubes:
(a)
The FMU vent tube (19) from the reducer at the FMU vent port.
(b)
The flow divider tube (20) from the elbow at the flow divider port on the fuel pump/FMU assembly (3).
(c)
The fuel supply tube (21) from the fuel supply port on the FMU.
(d)
The fuel pressure tube (11) from the elbow in the fuel pressure port on the FMU adapter.
(e)
The fuel return tube (15) from the nipple in the fuel return port on the FMU adapter.
(f)
The fuel drain line (22) from the elbow on the drain port for the fuel pump.
(g)
The fuel supply tube (9) from the nipple in the fuel supply port for the fuel pump.
S 014-045
(4)
Remove the fuel pump/FMU assembly (3):
(a)
Remove the nut (18) and the bolt (4) that attach the three loop clamps (8 and 16) to the flat bracket (13).
(b)
Hold the fuel pump/FMU assembly (3).
(c)
Remove the four nuts (1 and 14) and the three washers (2).
(d)
Remove the fuel pump/FMU assembly (3).
S 024-046
(5)
Remove the plain seal (6):
(a)
Remove the retainer ring (7) from the spur gear shaft in the accessory gearbox (5).
(b)
Use the extractor to remove the plain seal (6) from the spur gear shaft in the accessory gearbox (5).
TASK 49-27-06-404-021
3. Fuel Pump Drive Spur Gear Shaft Oil Seal Installation (Fig. 401)_____________________________________________________
A. Consumable Materials
(1) D00418 Oil - Aircraft Turbine Engine
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
49-27-06
ALL ú ú 01 Page 403 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
B. References
(1) 12-22-02/301, Auxiliary Power Unit (Oil Change)
C. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 6 | Plain Seal | 49-27-06 | 01 | 50 | 2.......….......…...................................…...........…......….......1
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 2(22)
