- do a check of the wiring of the F/O GPWS/G/S pushbutton switch (4WZ) from pin A/8 to the first terminal block (Ref. ASM 34-48/01).
(a) If there is no continuity:
- repair the above wiring.
(b) If there is continuity:
- do a check and repair the wiring of the annunciator light test and interface board (4LP) from pin A/10 to the first terminal block (Ref. ASM 34-48/01).
(2) If the GPWS legend of the CAPT GPWS/G/S pushbutton switch only does not come on:
- replace the P/BSW - GPWS/G/S (5WZ) (Ref. AMM TASK 33-10-00-000-002) and (Ref. AMM TASK 33-10-00-400-002).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-48-00∞∞∞∞∞∞∞∞∞∞Page 223
Aug 01/05 CES (a) If the fault continues:
- do a check of the wiring of the CAPT GPWS/G/S pushbutton switch (5WZ) : . pin A/7 to the first terminal block . pin A/8 to F/O GPWS/G/S pushbutton switch (4WZ) pin A/6 (Ref. ASM 34-48/01).
1 If there is no continuity:
_ - repair the above wiring.
2 If there is continuity:
_
- do a check and repair the wiring of the F/O GPWS/G/S pushbutton switch (4WZ) from pin A/9 to pin A/5 (Ref. ASM 34-48/01).
(3) If the GPWS legend of the F/O GPWS/G/S pushbutton switch only does not come on:
- replace the P/BSW - GPWS/G/S (4WZ) (Ref. AMM TASK 33-10-00-000-002) and (Ref. AMM TASK 33-10-00-400-002).
(a) If the fault continues:
- do a check and repair the wiring of the F/O GPWS/G/S pushbutton switch (4WZ) from pin A/7 to the first terminal block (Ref. ASM 34-48/01).
(4) If the two GPWS legends come on:
- replace the GPWC (1WZ) (Ref. AMM TASK 34-48-34-000-001) and (Ref. AMM TASK 34-48-34-400-001).
(a) If the fault continues:
- replace the BOARD-ANN LT TEST & INTFC (4LP) (Ref. AMM TASK 33-14-33-000-001) and (Ref. AMM TASK 33-14-33-400-001).
1 If the fault continues:
_
- do a check of the wiring of the annunciator light test and interface board (4LP): . pin A/45 to GPWC (1WZ) pin AB/7B . pin A/21 to the circuit breaker 2WZ (Ref. ASM 34-48/01).
a If there is no continuity:
_ - repair the above wiring.
b If there is continuity:
_
- replace the C/B - EIS/GPWS/28VDC (2WZ).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞34-48-00∞∞∞∞∞∞∞∞∞∞Page 224
201-214, May 01/05 CES
R **ON A/C 106-149, 215-299, 301-399, 401-499,
B. If the PULL UP legend of one or two PULL UP/GPWS pushbutton switches does not - on the panel 25VU, set the INT LT/ANN LT switch to TEST and do a check
to see if the PULL UP legends come on.
(1) If the two PULL UP legends do not come on:
- do a check of the wiring of the F/O PULL UP/GPWS pushbutton switch (4WZ) from pin A/8 to the first terminal block (Ref. ASM 34-48/01).
(a) If there is no continuity:
- repair the above wiring.
(b) If there is continuity:
- do a check and repair the wiring of the annunciator light test and interface board (4LP) from pin A/10 to the first terminal block (Ref. ASM 34-48/01).
(2) If the PULL UP legend of the CAPT PULL UP/GPWS pushbutton switch only does not come on:
- replace the P/BSW - PULL UP/GPWS (5WZ) (Ref. AMM TASK 33-10-00-000-002) and (Ref. AMM TASK 33-10-00-400-002).
(a) If the fault continues:
- do a check of the wiring of the CAPT PULL UP/GPWS pushbutton switch (5WZ) : . pin A/7 to the first terminal block . pin A/8 to F/O PULL UP/GPWS pushbutton switch (4WZ) pin A/6 (Ref. ASM 34-48/01).
1 If there is no continuity:
_ - repair the above wiring.
2 If there is continuity:
_
- do a check and repair the wiring of the F/O PULL UP/GPWS pushbutton switch (4WZ) from pin A/9 to pin A/5 (Ref. ASM 34-48/01).
(3) If the PULL UP legend of the F/O PULL UP/GPWS pushbutton switch only does not come on:
- replace the P/BSW - PULL UP/GPWS (4WZ) (Ref. AMM TASK 33-10-00-000-002) and (Ref. AMM TASK 33-10-00-400-002).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 3(73)
