1SQ2) ASM 34-41/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the weather radar 1 with the EIS DMC selector switch on the SWITCHING panel 8VU in CAPT/3 position (Ref. AMM TASK 34-41-00-740-002).
4. Fault Isolation
_______________
A. If the test result is satisfactory:
(1) Replace the DMC-1 (1WT1) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001).
(2) If the fault continues:
- do a check of the wiring between DMC1 (1WT1) pins AA/12A, 12B and terminal block 1851VT39 pins A, F and between DMC1 (1WT1) pins AA/12C, 12D and terminal block 1851VT38 pins F, A (Ref. ASM 34-41/01).
B. If the test gives the maintenance message DMC1/2/3(1WT1/2/3)/WXR1(1SQ1):
(1) Replace the XCVR-WEATHER RADAR, 1 (1SQ1) (Ref. AMM TASK 34-41-33-000-004) and (Ref. AMM TASK 34-41-33-400-003).
(2) If the fault continues:
- do a check of the wiring between weather radar transceiver 1 (1SQ1) pins AB/2D, 3D and terminal block 1851VT39 pins D, J and between weather radar transceiver 1 (1SQ1) pins AB/2G, 3G and terminal block 1851VT38 pins J, D (Ref. ASM 34-41/01).
5. Close-up
________
A. Do the test given in Para. 3.A.
Result of the BITE Test of the Weather Radar 1 not Satisfactory on F/O ND/PFD
1. Possible Causes
_______________
- DMC-2 (1WT2)
- XCVR-WEATHER RADAR, 1 (1SQ1)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3)
AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
AMM 34-41-00-740-002 BITE Test of the Weather Radar
AMM 34-41-33-000-004 Removal of the Weather Radar Transceiver (1SQ1, 1SQ2)
AMM 34-41-33-400-003 Installation of the Weather Radar Transceiver (1SQ1,
1SQ2) ASM 34-41/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the weather radar 1 with the EIS DMC selector switch on the SWITCHING panel 8VU in F/O/3 position (Ref. AMM TASK 34-41-00-740-002).
4. Fault Isolation
_______________
A. If the test result is satisfactory:
(1) Replace the DMC-2 (1WT2) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001).
(2) If the fault continues:
- do a check of the wiring between DMC2 (1WT2) pins AA/12A, 12B and terminal block 1851VT39 pins C, H and between DMC2 (1WT2) pins AA/12C, 12D and terminal block 1851VT38 pins H, C (Ref. ASM 34-41/01).
B. If the test gives the maintenance message DMC1/2/3(1WT1/2/3)/WXR1(1SQ1):
(1) Replace the XCVR-WEATHER RADAR, 1 (1SQ1) (Ref. AMM TASK 34-41-33-000-004) and (Ref. AMM TASK 34-41-33-400-003).
(2) If the fault continues:
- do a check of the wiring between weather radar transceiver 1 (1SQ1) pins AB/2G, 3G and terminal block 1851VT38 pins J, D and between weather radar transceiver 1 (1SQ1) pins AB/2D, 3D and terminal block 1851VT39 pins D, J (Ref. ASM 34-41/01).
5. Close-up
________
A. Do the test given in Para. 3.A.
Result of the BITE Test of the Weather Radar 1 not Satisfactory on CAPT and F/O NDs/PFDs
1. Possible Causes
_______________
- XCVR-WEATHER RADAR, 1 (1SQ1)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-41-00-740-002 BITE Test of the Weather Radar
AMM 34-41-33-000-004 Removal of the Weather Radar Transceiver (1SQ1, 1SQ2)
AMM 34-41-33-400-003 Installation of the Weather Radar Transceiver (1SQ1,
1SQ2)
ASM 34-41/01
3. Fault Confirmation 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 3(25)
