R TASK 34-41-00-810-847 R Loss of the ADR Interface between the WXR Transceiver 2 and the ADIRU 2 + 3 R 1. Possible Causes
_______________
R - XCVR-WEATHER RADAR, 2 (1SQ2)
R - ADIRU-2 (1FP2)
R - ADIRU-3 (1FP3)
R - wiring from the ADIRU2 to the weather radar transceiver 2
R - wiring from the ADIRU3 to the weather radar transceiver 2
R 2. Job Set-up Information
______________________
R A. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R AMM 34-12-34-000-001 R AMM 34-12-34-400-001 R AMM 34-41-00-740-002 R AMM 34-41-33-000-004 R AMM 34-41-33-400-003 R R ASM 34-41/01
R 3. Fault Confirmation
__________________
R A. Test
Removal of the ADIRU (1FP1, 1FP2, 1FP3)
Installation of the ADIRU (1FP1, 1FP2, 1FP3)
BITE Test of the Weather Radar
Removal of the Weather Radar Transceiver (1SQ1, 1SQ2)
Installation of the Weather Radar Transceiver (1SQ1,
1SQ2)
R NOTE : Do the test that follows with the ATT HDG selector switch (13FP),
____ R on the SWITCHING panel 8VU, at NORM then at F/O ON 3.
R Do the BITE test of the weather radar (Ref. AMM TASK 34-41-00-740-002).
R 4. Fault Isolation
_______________
R A. If the test gives the maintenance message ADIRU2+3(1FP2+3) ADR
R BUS/WXR2(1SQ2):
R - replace the XCVR-WEATHER RADAR, 2 (1SQ2) (Ref. AMM TASK 34-41-33-000-R 004) and (Ref. AMM TASK 34-41-33-400-003).
R (1) If the fault continues:
R - swap the ADIRU-2 (1FP2) and the ADIRU1 (Ref. AMM TASK 34-12-34-000-R 001) and (Ref. AMM TASK 34-12-34-400-001).
R (a) If the fault stops:
R - replace the ADIRU that you installed on side 1.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-41-00∞∞∞∞∞∞∞∞∞∞Page 285
Aug 01/05 CES
R (b) If the fault continues:
R - swap back the ADIRU1 and the ADIRU2
R - swap the ADIRU-3 (1FP3) and the ADIRU1 (Ref. AMM TASK 34-12-34-
R 000-001) and (Ref. AMM TASK 34-12-34-400-001).
R 1_ If the fault stops:
R - replace the ADIRU that you installed on side 1.
R 2_ If the fault continues:
R - remove the weather radar transceiver 2
R - remove the ADIRU2 and the ADIRU3
R - do a check and repair the wiring from the ADIRU2 to the
R weather radar transceiver 2: from pins AB/5E, 6E of the
R ADIRU2 to pins AB/11J, 12J of the weather radar transceiver
R 2 (Ref. ASM 34-41/01) and the wiring from the ADIRU3 to the
R weather radar transceiver 2: from pins AB/5E, 6E of the
R ADIRU3 to pins AB/12G, 13G of the weather radar transceiver
R 2.
R - install the weather radar transceiver 2
R - install the ADIRU2 and the ADIRU3.
R B. Do the test given in Para. 3.
TASK 34-42-00-810-801
Failure of the Radio Altimeter (RA) Transceiver 1
1. Possible Causes
_______________
- XCVR-RA, 1 (2SA1)
- short to ground at the wiring between the circuit breaker (1SA1) and the RA transceiver 1 (2SA1).
- C/B-COM NAV/RAD ALTM/1
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-32-00-810-934 Failure of the Digital Links AMM 34-42-00-740-002 BITE Test of the Radio Altimeter AMM 34-42-33-000-001 Removal of the Radio Altimeter Transceiver 2SA1 and
2SA2 AMM 34-42-33-400-001 Installation of the Radio Altimeter Transceiver 2SA1 and 2SA2 ASM 34-42/01
中國(guó)航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 導(dǎo)航 NAVIGATION 3(28)
