- LOUD SPEAKER-F/O (8WW)

 - CMPTR-TCAS (1SG)

 - wiring of the CAPT loud speaker (7WW)

 - wiring of the F/O loud speaker (8WW)

 - RELAY-RCDR/CVR TEST (20RK)

 - wiring of the AUDIO OUTPUT discretes from the TCAS computer (1SG) to the RCDR/CVR test relay (20RK)

 - wiring of the RCDR/CVR test relay (20RK)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 31-53-21-000-001 Removal of the Loudspeakers (7WW,8WW)
 AMM 31-53-21-400-001 Installation of the Loudspeakers (7WW,8WW)
 AMM 34-43-00-740-001 BITE Test of the TCAS
 AMM 34-43-34-000-001 Removal of the TCAS Computer (1SG)
 AMM 34-43-34-400-001 Installation of the TCAS Computer (1SG)
 ASM 34-43/01

 3. Fault Confirmation
__________________
 A. Test
 (1) Do the BITE test of the TCAS (Ref. AMM TASK 34-43-00-740-001) and make sure that you can hear the synthesized voice message in the two loud speakers.

 4. Fault Isolation
_______________

 A. If you cannot hear the synthesized voice message:
 (1) In the CAPT loud speaker only:

 - replace the LOUD SPEAKER-CAPT (7WW) (Ref. AMM TASK 31-53-21-000-001) and (Ref. AMM TASK 31-53-21-400-001).
 (a) If the fault continues:
 - do a check and repair the wiring of the CAPT loud speaker (7WW): . pin A/R to the first terminal block . pin A/S to the first terminal block (Ref. ASM 34-43/01).

 (2) In the F/O loud speaker only:

 - replace the LOUD SPEAKER-F/O (8WW) (Ref. AMM TASK 31-53-21-000-001) and (Ref. AMM TASK 31-53-21-400-001).
 (a) If the fault continues:
 - do a check and repair the wiring of the F/O loud speaker (8WW): . pin A/R to the first terminal block . pin A/S to the first terminal block (Ref. ASM 34-43/01).

 (3) In the two loud speakers:

 - replace the CMPTR-TCAS (1SG) (Ref. AMM TASK 34-43-34-000-001) and (Ref. AMM TASK 34-43-34-400-001).
 (a) If the fault continues:
 - replace the RELAY-RCDR/CVR TEST (20RK).
 1 If the fault continues:
_
 - do a check of the wiring of the AUDIO OUTPUT discretes from the TCAS computer (1SG) to the RCDR/CVR test relay (20RK) (Ref. ASM 34-43/01).
 a If there is no continuity:
_ - repair the above wiring.
 b If there is continuity:
_
 - do a check and repair the wiring of the RCDR/CVR test relay (20RK): . pin A/B to the first terminal block . pin A/C to the first terminal block (Ref. ASM 34-43/01).
 B. Do the test given in Para. 3.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-43-00∞∞∞∞∞∞∞∞∞∞Page 245
 Aug 01/05R CES

R Failure of the Suppressor Coaxial Cables of the TCAS
 1. Possible Causes
_______________
 - coaxial cable from the TCAS computer (1SG) to the ATC/Mode S transponder 1 (1SH1)

 - coaxial cable from the TCAS computer (1SG) to the ATC/Mode S transponder 2 (1SH2)

 - coaxial cable from the TCAS computer (1SG) to the DME interrogator 1 (2SD1)

 - coaxial cable from the TCAS computer (1SG) to the DME interrogator 2 (2SD2)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 34-43-34-000-001 Removal of the TCAS Computer (1SG)
 AMM 34-43-34-400-001 Installation of the TCAS Computer (1SG)
 AMM 34-51-33-000-001 Removal of the DME Interrogator (2SD1,2SD2)
 AMM 34-51-33-400-001 Installation of the DME Interrogator (2SD1,2SD2)
 AMM 34-52-33-000-001 Removal of the ATC/Mode S Transponder (1SH1, 1SH2)
 AMM 34-52-33-400-001 Installation of the ATC/Mode S Transponder

 (1SH1,1SH2)
 ASM 34-43/01

 3. Fault Confirmation
__________________
 A. Test
 Not applicable, you cannot confirm this fault on the ground.

 4. Fault Isolation
_______________
 A. If the fault symptom is identified by the crew observation on the ND, TCAS-amber filled circle on the aircraft symbol or TCAS-false intruders:
 - remove the TCAS computer (1SG) (Ref. AMM TASK 34-43-34-000-001)

 - remove the ATC/Mode S transponder 1 (1SH1) (Ref. AMM TASK 34-52-33-000-001).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 3(62)