(2) If it does not come into view and if the right window of the RMI is blank:
- replace the RMI-VOR/ADF/DME (21FN) (Ref. AMM TASK 34-57-22-000-002) and (Ref. AMM TASK 34-57-22-400-002).
(a) If the fault continues:
- do a check and repair the wiring of the DME2 bus from the VOR/ADF/DME RMI (21FN) to the first terminal block (Ref. ASM 34-57/01).
(3) If it comes into view and if the right window of the RMI is blank:
- do the BITE test of the DME (Ref. AMM TASK 34-51-00-740-002).
(a) If the BITE test gives a maintenance message:
- Do the trouble shooting procedure related to the maintenance message.
(b) If the BITE test does not give a maintenance message:
- replace the INTRG-DME, 2 (2SD2) (Ref. AMM TASK 34-51-33-000-001) and (Ref. AMM TASK 34-51-33-400-001).
1_ If the fault continues:
- do a check and repair the wiring of the DISTANCE DATA OUTPUT
2 bus from the DME2 interrogator (2SD2) to the first
terminal block (Ref. ASM 34-57/01).
**ON A/C ALL
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-57-00∞∞∞∞∞∞∞∞∞∞Page 220
May 01/05R
CES R **ON A/C 001-049, 051-099, 101-105, 151-199,
TASK 34-57-00-810-810
Reception of the HDG Data on the VOR/DME RMI Inoperative
1. Possible Causes
_______________
- RMI-VOR/DME (11FN)
- ADIRU-1 (1FP1)
- ADIRU-3 (1FP3)
- wiring of the OUTPUT BUS 2 bus from the ADIRU1 (1FP1) to the VOR/DME RMI (11FN)
- wiring of the OUTPUT BUS 2 bus from the ADIRU3 (1FP3) to the VOR/DME RMI (11FN)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-14-00-740-001 Interface Test of the IR
AMM 34-57-22-000-001 Removal of the VOR/DME RMI (11FN)
AMM 34-57-22-400-001 Installation of the VOR/DME RMI (11FN)
ASM 34-57/01
3. Fault Confirmation
__________________
A. Test
(1) Do the Interface test of the IR (Ref. AMM TASK 34-14-00-740-001).
4. Fault Isolation
_______________
A. If during the test, the HDG flag comes into view on the VOR/DME RMI:
- do a check of the position of the ATT/HDG selector switch on the SWITCHING panel 8VU.
(1) If the ATT/HDG selector switch is at NORM or F/O 3:
- replace the RMI-VOR/DME (11FN) (Ref. AMM TASK 34-57-22-000-001) and (Ref. AMM TASK 34-57-22-400-001).
(a) If the fault continues:
- replace the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞34-57-00∞∞∞∞∞∞∞∞∞∞Page 221
May 01/05 CES (2) If the ATT/HDG selector switch is at CAPT3:
1_ If the fault continues:
- do a check and repair the wiring of the OUTPUT BUS 2 bus
from the ADIRU1 (1FP1) to the VOR/DME RMI (11FN) (Ref. ASM
34-57/01).
- replace the RMI-VOR/DME (11FN) (Ref. AMM TASK 34-57-22-000-001) and (Ref. AMM TASK 34-57-22-400-001).
(a) If the fault continues:
- replace the ADIRU-3 (1FP3) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
1 If the fault continues:
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導(dǎo)航 NAVIGATION 3(167)
