(20)
 Clean these items with a lint-free cloth made moist with CLEANING AGENTS (Material No. 11-026):

 -
the forward sub-spar (49)

 -
the landings (40), (44), (54), (58) and (62)

 -
the landing (40), (44), (54), (58) and (62) interfaces and the adjacent areas.

 (21)
 Examine the two parts of the landings (40), (44), (54), (58) and (62) for damage. Discard those that are damaged.

R 1EFF : 106-149, 157-199, 209-299, 301-399, 1 57-41-37Page 857 1401-499, 1Aug 01/05 1 1 1CES 1

 (22)
 Assemble the landings (40), (44), (54), (58) and (62) as follows:

 (a)
 Put the two parts of the applicable landing together.

 (b)
 Install the spacers (122) and the washers (121).

 (c)
 Install the shear rivets (120) (Ref. ASRM 514211).

 (d)
 Make sure that the two parts of the landings can move on the spacers (122).

 (23)
 Examine the pressure-relief panel (50) for damage. Discard it if it is damaged.

 (24)
 Put the new plate nuts (130) and the new spacers (131) in position on the new forward angle (51) (Ref. ASRM 574118).

 (25)
 Install the rivets (132) (Ref. ASRM 514211).

 (26)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the forward angle (51) and the forward sub-spar (49).

 (27)
 Put the forward angle (51) in position on the forward sub-spar (49). Install the rivets (48) (Ref. ASRM 514211).

 (28)
 Put the new plate nuts (130) and the new spacers (131) in position on the new forward angle (47) (Ref. ASRM 574118).

 (29)
 Install the rivets (132) (Ref. ASRM 514211).

 (30)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the forward angle (47) and the forward sub-spar (49).

 (31)
 Put the forward angle (47) in position on the forward sub-spar (49). Install the rivets (46) (Ref. ASRM 514211).

 (32)
 Put the new plate nuts (130) and the new spacers (131) in position on the new forward angle (65) (Ref. ASRM 574118).

 (33)
 Install the rivets (132) (Ref. ASRM 514211).

 (34)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the forward angle (65) and the forward sub-spar (49).

 (35)
 Put the forward angle (65) in position on the forward sub-spar (49). Install the rivets (60) (Ref. ASRM 514211).

R 1EFF : 106-149, 157-199, 209-299, 301-399, 1 57-41-37Page 858 1401-499, 1Aug 01/05 1 1 1CES 1

 (36)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the landing (40) and the aircraft structure.

 (37)
 Put the landing (40) in position.

 (38)
 Install the bolts (42) and the nuts (41) (Ref. ASRM 514211).

 (39)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the landing (44) and the aircraft structure.

 (40)
 Put the landing (44) in position.

 (41)
 Install the bolts (45) and the nuts (43) (Ref. ASRM 514211).

 (42)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the landing (54) and the aircraft structure.

 (43)
 Put the landing (54) in position.

 (44)
 Install the bolts (56) and the nuts (55) (Ref. ASRM 514211).

 (45)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the landing (58) and the aircraft structure.

 (46)
 Put the landing (58) in position.

 (47)
 Install the bolts (59) and the nuts (57) (Ref. ASRM 514211).

 (48)
 Apply SEALANTS (Material No. 09-001) to the mating faces of the landing (62) and the aircraft structure.

 (49)
 Put the landing (62) in position.

 (50)
 Install the bolts (63) and the nuts (61) (Ref. ASRM 514211).

 (51)
 Examine the seals (140) around the pressure-relief panel (50) for damage and correct condition. Replace damaged seals as follows:

 (a)
 Remove the damaged length of seal (140) with a non-metallic scraper.

 (b)
 Clean the applicable area of the panel with a lint-free cloth made moist with CLEANING AGENTS (Material No. 11-026).

 (c)
 Cut to length a new seal (140).

 (d)
 Put the new seal (140) in position on the panel.

R 1EFF : 106-149, 157-199, 209-299, 301-399, 1 57-41-37Page 859 1401-499, 1Aug 01/05 1 1 1CES 1

 (e)
 Cut the corners of the new seal (140) to make a continuous surface at the corner joints.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼3(11)