TPIS Detection Unit
 Figure 401/TASK 32-49-34-991-001
 1EFF :  051-099,  1  32-49-34 Page 403 
1  1  May 01/05
 1  1
 1CES  1

 TASK 32-49-34-400-001
 Installation of the TPIS Detection Unit (2GV)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.8 m (5 ft. 11 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power 32-49-00-720-001 Crosscheck TPIS Reading and Tire Pressure Gauge 32-49-34-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 32-49-34-860-050
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the ground service network is energized (Ref. TASK 24-42-00-861-001).

 (2)
 Make sure that the access platform is in position at the access door

 811.

 (3)
 Make sure that the access door 811 is open.

 1EFF : 051-099, 1 32-49-34Page 404 1 1 May 01/05 1 1 1CES 1 Subtask 32-49-34-865-051

 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU HYDRAULIC/TIRE/PRESS 1GV M31
 4. Procedure
_________
 (Ref. Fig. 401/TASK 32-49-34-991-001) Subtask 32-49-34-420-050
 A. Installation of the TPIS Detection Unit
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Remove the blanking caps from the electrical connectors.

 (4)
 Make sure that the electrical connectors are clean and in the correct condition.

 (5)
 Install the TPIS detection unit (1) on its rack (3).

 (6)
 Push the TPIS detection unit (1) on its rack (3) to connect the electrical connectors (2).

 (7)
 Engage the nuts (4) on the lugs (5) and tighten.

 (8)
 Make sure that the OBRMs are correctly installed. If they are not installed correctly, push the OBRMs until the locking devices are locked.

 Subtask 32-49-34-865-053
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU HYDRAULIC/TIRE/PRESS 1GV M31
 1EFF : 051-099, 1 32-49-34Page 405 1 1 May 01/05 1 1 1CES 1 Subtask 32-49-34-720-050

 C. Do the Functional Test of the Tire Pressure Indicating System (Ref. TASK 32-49-00-720-001).
 5. Close-up
________ Subtask 32-49-34-410-050
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the access door 811.

 (3) Remove the access platform(s). Subtask 32-49-34-862-050
 B. De-energize the ground service network (Ref. TASK 24-42-00-862-001).
 1EFF : 051-099, 1 32-49-34Page 406 1 1 May 01/05 1 1 1CES 1 STEERING - DESCRIPTION AND OPERATION

____________________________________
 1. General
_______
 A. Nose Wheel Steering
 (Ref. Fig. 001)
 Nose wheel steering is possible from the cockpit as follows:

 (1) During taxi, and more generally at low speed, through action on a handwheel. There are two identical handwheels: one for the Captain, one for the First Officer. In the event of simultaneous operation, the orders that the handwheels give are algebraically added. The maximum travel of the wheels is plus or minus 74 deg. The maximum corresponding travel of the handwheel is plus or minus 75 deg. However, the law between these two travels is not linear.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架8(67)