3. Job Set-up
__________
Subtask 32-48-00-941-050
A. Safety Precautions
(1)
Put the warning notice(s) in position to tell persons not to operate the landing gear control lever and the brake pedals.
(2)
Make sure that the PARK BRK control switch is set to OFF before you do the deactivation.
R 1EFF : 051-099, 301-399, 401-499, 1 32-48-00Page 401 1 1 Aug 01/05 1 1 1CES 1
4. Procedure_________
R
Subtask 32-48-00-860-053
R A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(2) Do the EIS Start procedure (Ref. TASK 31-60-00-860-001).
Subtask 32-48-00-040-050
R B. Removal of the Guard Assy
(1) If necessary remove the pieces of guard assy (Ref. TASK 32-48-51-000-005).
(2) Make sure that there are no pieces of guard assy in the axle. If there are pieces of guard assy, remove them.
Subtask 32-48-00-210-050
R C. Check of the Brake Temperature
(1) On the upper ECAM DU, make sure that the BRAKE HOT warning is not shown.
NOTE : If the BRAKE HOT warning is shown, departure of the aircraft____ is not permitted until the warning goes off.
Subtask 32-48-00-860-054
R D. Aircraft Maintenance Configuration
(1) Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
(2) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R 1EFF : 051-099, 301-399, 401-499, 1 32-48-00Page 402 1 1 Aug 01/05 1 1 1CES 1
5. Close-up
________ Subtask 32-48-00-942-050
A. Removal of the Equipment
(1)
Remove the warning notice(s).
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
Subtask 32-48-00-867-051
B. In the cockpit, install a temporary placard to tell the crew that the brake fan 1 (2, 3, 4) are deactivated.
R 1EFF : 051-099, 301-399, 401-499, 1 32-48-00Page 403 1 1 Aug 01/05 1 1 1CES 1
TASK 32-48-00-440-001 Reactivation of the Brake Cooling System
1. Reason for the Job
__________________
Refer to the CDL TASK: 32-1
Fan Brakes-missing Debris Guard
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-48-00-720-001 Functional Test of the Brake Fans 32-48-51-400-005 Installation of the Fan Assy (7GS,8GS,9GS,10GS)
3. Job Set-up
__________ Subtask 32-48-00-941-051
A. Safety Precautions
(1)
Put the warning notice(s) in position to tell persons not to operate the landing gear control lever and the brake pedals.
(2)
Make sure that the PARKING BRK control switch is set to OFF before you do the reactivation.
R 1EFF : 051-099, 301-399, 401-499, 1 32-48-00Page 404 1 1 Aug 01/05 1 1 1CES 1
4. Procedure
_________
Subtask 32-48-00-420-050
A. Installation of the Guard Assy
(1) Install the Guard Assy (Ref. TASK 32-48-51-400-005). R
Subtask 32-48-00-710-052 R B. Test
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架8(35)
