曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Subtask 27-84-62-220-071
 W. Dimensional Check of Slat 3, Track 7
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 630 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 15.966 | 15.984 | | | 15.943 | | | | OD 20 |(0.6285) |(0.6292) | | |(0.6276) | | | | | | | 0.016 | 0.052 | | | 0.098 | | | | | (0.0006)| (0.0020)| | |(0.0038)| | C | 16.000 | 16.018 | | | | 16.041 | | | ID 19 |(0.6299) |(0.6306) | | | |(0.6315) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-072
 X. Dimensional Check of Slat 3, Track 7
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.640 | | | | OD 16 |(0.4986) |(0.4993) | | |(0.4976) | | | | | | | 0.016 | 0.061 | | | 0.113 | | | | | (0.0006)| (0.0024)| | |(0.0044)| | C | 12.700 | 12.727 | | | | 12.753 | | | ID 20 |(0.5000) |(0.5010) | | | |(0.5020) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 631 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-62-220-073
 Y. Dimensional Check of Slat 3, Track 7
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.653 | | | | OD 16 |(0.4986) |(0.4993) | | |(0.4981) | | | | | | | 0.003 | 0.034 | | | 0.060 | | | | | (0.0001)| (0.0013)| | |(0.0023)| | C | 12.687 | 12.700 | | | | 12.713 | | | ID 18 |(0.4994) |(0.5000) | | | |(0.5005) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-074
 Z. Dimensional Check of Slat 3, Track 7
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 632 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.643 | | | | OD 16 |(0.4986) |(0.4993) | | |(0.4977) | | | | | | | 0.016 | 0.052 | | | 0.098 | | | | | (0.0006)| (0.0020)| | |(0.0038)| | C | 12.700 | 12.718 | | | | 12.741 | | | ID 17 |(0.5000) |(0.5007) | | | |(0.5016) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-075
 AA. Dimensional Check of Slat 3, Track 7
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(98)