Slat Tracks 5 and 9 - Clearance Dimensions Figure 405/TASK 27-84-62-991-017
 1EFF : 1 1R 1CES  ALL  1 11 1 27-84-62 Page 429 May 01/04

 (4) Install the applicable closing plate(s) (Ref. TASK 27-84-69-400-001). Subtask 27-84-62-865-054
 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CV, 7CV.
 Subtask 27-84-62-942-050
 D. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Remove the access platform(s).

 (5)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 27-84-62Page 430 1 1 May 01/05R 1 1 1CES 1

 TASK 27-84-62-000-002
 Removal of the Side Rollers - Slat Tracks 5 thru 12
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific warning notice(s)
 No specific adjustable access platform 3.5 m (11 ft. 6 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-84-49-000-001  Removal of the Type B Actuators 6027CM(6077CM)/6029CM(6079CM)/6035CM (6085CM)/6039CM(6089CM)/6045CM(6095CM)
 27-84-49-000-002  Removal of the Type B Actuators
 6033CM(6083CM)/6037CM(6087CM)/6041CM (6091CM) 27-84-61-000-001 Removal of the Slat Tracks 1 thru 4 27-84-64-000-001 Removal of the No. 2 Slat 27-84-65-000-001 Removal of the No. 3 Slat 27-84-66-000-001 Removal of the No. 4 Slat 27-84-67-000-001 Removal of the No. 5 Slat
 1EFF : ALL 1 27-84-62Page 431 1 1 May 01/05R 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 27-84-62-991-002 Fig. 402
 **ON A/C 301-399,
 27-84-62-991-002-A Fig. 402A
 **ON A/C ALL
 3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 (Ref. Fig. 402/TASK 27-84-62-991-002)
 **ON A/C 301-399,

 (Ref. Fig. 402A/TASK 27-84-62-991-002-A)
 **ON A/C ALL

 Subtask 27-84-62-941-054
 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Put a warning notice(s) in the cockpit to tell persons not to operate the slat controls.

 (3)
 Make sure that the TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER (98D27803500001) is on the slat/flap control lever.

 Subtask 27-84-62-865-052
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/SLT/CTL AND MONG/SYS1 5CV B06 121VU FLIGHT CONTROLS/SLT/CTL/SYS2 7CV R21
 Subtask 27-84-62-010-051
 C. Get Access
 (1)
 Put an adjustable access platform below the applicable zone 510 or

 610.

 (2)
 Remove the applicable slat:

 -
for track 5 and 6 side-rollers (Ref. TASK 27-84-64-000-001)

 -
for track 7 and 8 side-rollers (Ref. TASK 27-84-65-000-001)

 -
for track 9 and 10 side-rollers (Ref. TASK 27-84-66-000-001)

 -
for track 11 and 12 side-rollers (Ref. TASK 27-84-67-000-001).