曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Subtask 27-84-62-220-062
 M. Dimensional Check of Slat 2, Track 6
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 624 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 12.666 | 12.684 | | | 12.653 | | | | OD 3 |(0.4986) |(0.4993) | | |(0.4981) | | | | | | | 0.003 | 0.034 | | | 0.060 | | | | | (0.0001)| (0.0013)| | |(0.0023)| | B | 12.687 | 12.700 | | | | 12.713 | | | ID 2 |(0.4994) |(0.5000) | | | |(0.5005) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-063
 N. Dimensional Check of Slat 2, Track 6
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.639 | | | | OD 18 |(0.4986) |(0.4993) | | |(0.4975) | | | | | | | 0.022 | 0.058 | | | 0.112 | | | | | (0.0008)| (0.0022)| | |(0.0044)| | C | 12.706 | 12.724 | | | | 12.751 | | | ID 16 |(0.5002) |(0.5009) | | | |(0.5020) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 625 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-62-220-064
 P. Dimensional Check of Slat 2, Track 6
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.653 | | | | OD 18 |(0.4986) |(0.4993) | | |(0.4981) | | | | | | | 0.003 | 0.034 | | | 0.060 | | | | | (0.0001)| (0.0013)| | |(0.0023)| | C | 12.687 | 12.700 | | | | 12.713 | | | ID 17 |(0.4994) |(0.5000) | | | |(0.5005) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-065
 Q. Dimensional Check of Slat 2, Track 6
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 626 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.639 | | | | OD 4 |(0.4986) |(0.4993) | | |(0.4975) | | | | | | | 0.022 | 0.058 | | | 0.112 | | | | | (0.0008)| (0.0022)| | |(0.0044)| | C | 12.706 | 12.724 | | | | 12.751 | | | ID 11 |(0.5002) |(0.5009) | | | |(0.5020) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-066
 R. Dimensional Check of Slat 2, Track 6
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(96)