(a)
 Remove the grip handle (1).

 (b)
 Adjust the special screws (3).

 (c)
 Do para B. (2) again.

 5. Close-up
________ Subtask 25-45-23-862-050
 A. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 EFF : ALL
25-45-23Page 404

 DISPENSER - SEAT COVER - REMOVAL/INSTALLATION
_____________________________________________
 TASK 25-45-24-000-001 Removal of the Seat Cover Dispenser
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power 25-45-24-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 25-45-24-861-050
 A. Aircraft Maintenance Configuration
 (1) Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 4. Procedure
_________ Subtask 25-45-24-020-050
 A. Removal of the Seat Cover Dispenser
 (Ref. Fig. 401/TASK 25-45-24-991-001)

 (1)
 Push the seat cover dispenser (1) up and remove the dispenser from the holder (2).

 (2)
 Remove the screws (3) and the holder (2) from the lavatory wall.

 EFF : ALL
25-45-24Page 401

 Seat Cover Dispenser
 Figure 401/TASK 25-45-24-991-001
 EFF :  ALL  25-45-24 Page 402 
Feb 01/98
 CES 

 TASK 25-45-24-400-001 Installation of the Seat Cover Dispenser
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 25-45-24-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 25-45-24-860-050
 A. Aircraft Maintenance Configuration
 (1) Make sure that the ground service network is energized
 (Ref. TASK 24-42-00-861-001).

 4. Procedure
_________ Subtask 25-45-24-210-050
 A. Preparation for Installation
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 (3)
 Do an inspection of the component interface and/or the adjacent area.

 EFF : ALL
25-45-24Page 403

 Subtask 25-45-24-420-050
 B. Installation of the Seat Cover Dispenser
 (Ref. Fig. 401/TASK 25-45-24-991-001)

 (1)
 Put the holder (2) in position on the lavatory wall and install the screws (3).

 (2)
 Push the seat cover dispenser (1) into the holder (2).

 5. Close-up
________ Subtask 25-45-24-862-050
 A. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 EFF : ALL
25-45-24Page 404

 TABLE - BABY NURSING - REMOVAL/INSTALLATION
___________________________________________
 TASK 25-45-25-000-001
 Removal of the Baby Nursing Table
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power
 **ON A/C 001-049, 051-058, 101-101,
 25-45-25-991-001 Fig. 401 R **ON A/C 059-099, 102-149, 151-199, 201-299, 301-399, 401-499,
 25-45-25-991-001-A  Fig. 401A
 **ON A/C ALL
 25-45-25-991-002  Fig. 402
 3. Job Set-up
__________
 Subtask 25-45-25-861-050
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設(shè)備3(127)