(7)
Put the hinge (13) together with the service cabinet door (10) on the lavatory wall and install the screws (11) and the washers (12).
(8)
Install the individual air outlet (3) to the upper part (1) of the
service cabinet (Ref. TASK 21-24-19-400-001).
(9)
Install the loudspeaker (2) to the upper part (1) of the service
cabinet (Ref. TASK 23-73-51-400-002).
(10)
Put the upper part (1) of the service cabinet in position on the lavatory wall and install the screws (4) and the washers (5).
(11)
If removed, position the lanyard (8) on the service cabinet door (10) and the lavatory wall and install the screws (6), the washers (7) and the nut (9).
(12)
Put the dispenser (14) into the service cabinet.
(13)
Put the spring balance in position on the cabinet door (10).
(14)
Close the service cabinet door (10).
(15)
Pull the spring balance to open the cabinet door (10). The force necessary to open the door must not be more than to 2.5 m.daN (18.43 lbf.ft).
(16)
If necessary, adjust the screws (23) until you get the correct force to open the cabinet door (10).
(17)
Close the cabinet door (10).
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 25-45-12-420-050-A
B. Installation of the Service Cabinet
(Ref. Fig. 402/TASK 25-45-12-991-002)
(1)
Connect the call button (16) to the lower part (15) of the service cabinet (Ref. TASK 23-73-11-400-001).
(2)
Connect the return to seat sign (17) to the lower part (15) of the service cabinet (Ref. TASK 23-73-62-400-001).
(3)
Remove the blanking caps from the electrical connectors.
(4)
Make sure that the electrical connectors are clean and in the correct condition.
(5)
Connect the electrical connector (22) to the razor socket (18).
(6)
Put the lower part (15) of the service cabinet in position on the lavatory wall and install the screws (19), the washers (20) and the screws (21).
(7)
Put the hinge (13) together with the service cabinet door (10) on the lavatory wall and install the screws (11) and the washers (12).
(8)
Put the upper and lower door stops (8) in position on the cabinet door (10) and install the screws (6), the washers (7) and the nuts (9).
(9)
Install the individual air outlet (3) to the upper part (1) of the service cabinet (Ref. TASK 21-24-19-400-001).
(10)
Install the loudspeaker (2) to the upper part (1) of the service cabinet (Ref. TASK 23-73-51-400-002).
(11)
Put the upper part (1) of the service cabinet in position on the lavatory wall and install the screws (4) and the washers (5).
(12)
Put the dispenser (14) into the service cabinet.
(13)
Put the spring balance in position on the cabinet door (10).
(14)
Close the service cabinet door (10).
R EFF : 004-049, 053-099, 101-149, 151-199, 25-45-12Page 409 201-299, 301-399, 401-499, Aug 01/05
CES
(15)
Pull the spring balance to open the cabinet door (10). The force necessary to open the door must not be more than to 2.5 m.daN (18.43 lbf.ft).
(16)
If necessary, adjust the screws (23) until you get the correct force to open the cabinet door (10).
(17) Close the cabinet door (10). **ON A/C ALL
Subtask 25-45-12-710-050
C. Operational Test
(1) Do the operational test of the razor socket.
NOTE : Use a multimeter to do this test.
____
(a)
Measure the voltage between the + and N connections on the razor socket.
(b)
The output voltage must be 110 V AC.
(c)
Remove the multimeter.
5. Close-up
________ Subtask 25-45-12-862-050
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-45-12Page 410
May 01/04
R
CES
MIRROR - REMOVAL/INSTALLATION
_____________________________
TASK 25-45-13-000-001 Removal of the Lavatory Mirror
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備3(113)
