(4)
 Install the overhead stowage compartments as necessary (Ref. TASK 25-24-41-400-001).

 (5)
 Install the cove light panel 252FX (Ref. TASK 25-23-48-400-001).

 (6)
 Install the upper sidewall panel 252BX (Ref. TASK 25-23-43-400-001).

 (7)
 Install the lower sidewall panel 252AX (Ref. TASK 25-23-44-400-001).

R  EFF : 001-049, 051-099, 101-149, 201-299, 25-43-42Page 439 301-399, 401-499, Config-2 Aug 01/05
 CES  CES

 (8) Install the floor covering as necessary (Ref. TASK 25-28-41-400-001) (Ref. TASK 25-28-42-400-001).
 (9) In the lavatory, install the emergency oxygen container 34WR (Ref. TASK 35-21-41-400-001).
 (10) Install the toilet assembly (Ref. TASK 38-31-41-400-001).
 (11) Install the wall-mounted cabin-attendant seat (Ref. TASK 25-22-41-400-001).
 (12) Install the cabin attendant swivel-seat (Ref. TASK 25-22-43-400-001).
 (13) Install the curtains (Ref. TASK 25-26-41-400-003).
 (14) Install the drain line behind the lavatory (Ref. TASK 38-30-00-410-002)
 (15) In the AFT cargo compartment, install the partition 162DW.
 (16) Install the sidewall panel 162CW.
 (17) Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
 (18) Remove the stepladder.
 (19) Remove the warning notices.
 (20) Make sure that the work area is clean and clear of tool(s) and other items.
 (21) Remove the access platform. 
R  **ON A/C 151-199, 
R  Subtask 25-43-42-410-071-A 
R  A. Close Access 
R  (1) Install the lower sidewall panel 252AX (Ref. TASK 25-23-44-400-001). 
R  (2) Install the upper sidewall panel 252BX (Ref. TASK 25-23-43-400-001). 
R  (3) Install the cove light panel 252FX (Ref. TASK 25-23-48-400-001). 

R  (4) Install the ceiling panel 262BC in the aft utility area (Ref. TASK 
R  25-23-42-400-002). 
R  (5) Install the ceiling panel 252JC (Ref. TASK 25-23-41-400-001). 
R  (6) Install the overhead stowage compartments (Ref. TASK 25-24-41-400-
001). 
R  (7) Install the door frame lining-panels 262DW, 262FW, 262HW (Ref. TASK 
R  25-23-45-400-005). 
R  (8) Install the floor covering (Ref. TASK 25-28-41-400-001) and 
R  (Ref. TASK 25-28-42-400-001). 
R  (9) Install the free-standing cabin-attendant seat (Ref. TASK 25-22-42-
400-001). 
R  (10) Install the doghouse forward of the lavatory E (Ref. TASK 25-27-46-
400-001). 
R  (11) Install the cabin attendant swivel-seat (Ref. TASK 25-22-43-400-001). 
R  (12) In the AFT cargo compartment, install the partition 162DW. 
R  (13) Install the sidewall panel 162CW. 
R  (14) Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002). 
R  (15) Remove the stepladder. 
R  (16) Remove the warning notices. 
R  (17) Make sure that the work area is clean and clear of tool(s) and other
 items. 
R  (18) Remove the access platform. 

R **ON A/C 106-149, 223-299, 301-399, 401-499,
 Subtask 25-43-42-390-051
 B. Repair of the Water Seal
 (Ref. Fig. 408/TASK 25-43-42-991-021)

 (1)
 Do a visual inspection of the seal (part of the lavatory).

 (2)
 If necessary remove the damaged seal.

 (3)
 Clean the component interface and/or the adjacent area.

 (4)
 Install a new seal.

 (a)
 Cut the rubber profile to the correct length and attach it with BONDING AND ADHESIVE COMPOUNDS (Material No. 08-066) to the cabin floor.

 (b)
 Make sure that the seal touches the lavatory and the lower side-wall panel.

 (c) If necessary seal gaps with SEALANTS (Material No. 09-036).
 **ON A/C ALL

 Subtask 25-43-42-862-051
 C. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 EFF : ALL
25-43-42Page 442

 Seal
 Figure 408/TASK 25-43-42-991-021

 CES  RAZOR SUPPLY - DESCRIPTION AND OPERATION

________________________________________
 1.
 General

_______
 An electrical razor socket is installed in each lavatory.

 2.
 Component Location

__________________
 **ON A/C 001-049, 051-099, 101-105, 151-152, 201-206,
 (Ref. Fig. 001) -------------------------------------------------------------------------------FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA | | | | DOOR | REF.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備3(105)