曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

[ 4L ] LENGTH The runway length in meters (M) or feet (ft), in four digits (26 300 ft or
8 000 m).
[ 5L ] ELV The elevation of the threshold in feet above sea level.
[ 6L ] CRS The runway course (degrees magnetic).
[ 1R ] LS IDENT The LOC, ILS or MLS identifier.
PILOTS' RUNWAY PAGE
The pilot uses this page to display or delete the defined and stored runways. The stored runways
are listed and numbered in the order in which they were inserted. The number is displayed in the
upper right-hand corner of the page. (For example, 2/4 means the runway is the second of four
stored runways).
The pilot can delete any stored runway from the database by displaying its ident in the 1L field,
then by pressing the CLR key on the MCDU control panel.
[ 6R ] DELETE ALL and
CONFIRM DELETE ALL
The pilot presses this key to erase all the stored runways, except
those used in the active or secondary flight plan. (The MCDU displays
“PILOT ELEMENT RETAINED”).
[ 1L ] to [ 6L ] These fields are similar to the RUNWAY page fields.
NEW RUNWAY PAGE
The pilot can use this page to define and store up to 10 runways.
When the pilot enters an ILS/LOC ident in the [ 1R ] field, the new navaid page comes up. When
the pilot has entered and stored the necessary data in the new navaid page, the new runway page
reappears.
The new runway page and the new navaid page (ILS/LOC) are not independent :
• When the flight crew first defines the ILS/LOC (on the new navaid page), the new runway page,
when called up, already displays the RWY course, RWY ident, and ILS ident (copied from the
new navaid page).
• When the flight crew first defines the runway (on the new runway page), the new navaid page,
when called up, already displays the ILS course, ILS ident, and runway ident.
The pilot must enter the two runway directions on two different new runway pages (Example :
LFRJ 08 and LFRJ 26) to allow the flight plan to select either one.
Note: When 10 runways are stored, entering a new stored runway deletes the first one of the
list (1/10).
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 59/126
FCOM 19 AUG 10
[ 1L ] to [ 6L ] These keys are used to enter information about the new runway.
[ 1R ] LS IDENT This key is used to enter the ILS/MLS/LOC ident. The NEW NAVAID
page comes up.
[ 5R ] RETURN The pilot presses this key to return to the NEW NAVAID page.
[ 6R ] STORE This prompt only appears when all the amber boxes have been filled
in.
Note: The NEW RUNWAY may be used for departure or destination, but no SID or STAR
can be associated or stored with this runway. Therefore, the pilot will use it as an
“independent” airport.
A new runway is identified by the 4–letter ICAO airport identifier, although all six or seven
digits must be entered.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 60/126
FCOM 19 AUG 10
ROUTE/PILOTS' ROUTE/NEW ROUTE PAGES
Applicable to:
,
,
MSN,,
4538,,
ROUTE PAGES
(Not-modifiable)
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 61/126
FCOM 19 AUG 10
[ 1L ] CO RTE Any company route ident, entered in this field, causes all the
elements of the route to be displayed.
Line 2 to Line 6 These lines display the various route elements, including waypoints
and airways.
[ 1R ] FROM/TO This field is automatically filled in, when the pilot enters the ident
for a company route. When the pilot manually enters a city pair, the
MCDU displays “NOT IN DATA BASE”, if the city pair is not in the
navigation database. If the city pair is in the database, the CO RTE
field displays the first route stored in small blue font. If more than one
route is stored, the pilot can scroll to see the different routes.
PILOTS' ROUTE PAGE
This page displays up to 5 routes, stored by the pilot. The Pilots' routes are listed and numbered in
the order of insertion. The number is displayed in the upper right-hand corner of the page.
[ 1L ] CO RTE This field identifies the stored route. Clearing this field deletes the
stored route.
Line 2 to Line 5 The fields in these lines are identical to the corresponding fields on
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機(jī)組操作手冊FLIGHT CREW OPERATING MANUAL 1(180)