曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

WIND PROFILE
To obtain the best predictions, the flight crew must enter the wind for the various flight phases and
specifically for waypoints in cruise.
�� ON GROUND:
During flight planning initialization, enter the winds for the climb and cruise phases using the
HISTORY WIND and WIND pages. Enter, manually or with ACARS, different wind values in
the climb and cruise phases. The system will compute a wind for all waypoints of the F-PLN
using linear interpolation between manual/ACARS entries.
The wind profile will be displayed on the F-PLN B page, and is called forecast wind profile.
Flight crew or ACARS entries are displayed in large font, and system-computed winds in small
font.
�� IN FLIGHT:
The system updates the predictions and the current ECON speed, using the measured wind at
the present position. It combines actual wind and forecast winds to compute the wind ahead of
the aircraft, but this is totally transparent to the flight crew.
During cruise, the flight crew will enter the descent winds and the approach wind. The system
will update the final predictions, compute the optimum descent profile and compute the
optimum speed in descent and approach.
The forecast wind profile will be used to compute fuel and time predictions, as well as ECON
speed/Mach targets.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
PERFORMANCE - OPTIMIZATION
A318/A319/A320/A321 FLEET DSC-22_20-40-10 P 2/16
FCOM 19 AUG 10
OPTIMUM TAKEOFF, APPROACH AND GO-AROUND SPEEDS
The FMGC computes takeoff speeds (F, S, Green Dot) during the preflight and takeoff phases,
using the performance model in the database and the takeoff weight.
The flight crew has to insert V1, VR, and V2 in the PERF TO page manually.
The FMGC uses the performance model and either the predicted landing weight or the current
gross weight at transition to the approach phase to compute approach speeds (VLS, VAPP, F, S,
Green Dot).
On the PERF APPR page, the selected LDG CONF determines the applicable VLS and VAPP,
the latter being updated by the WIND correction that the flight crew enters on the same page. The
FMGC uses the performance model and gross weight to compute go-around speeds (F, S, Green
Dot).
OPTIMUM TARGET SPEED FOR CLIMB, CRUISE AND DESCENT (ECON SPD/MACH)
The FMGS computes the optimum target speed (ECON SPD/MACH) as a function of:
‐ Cost index (CI)
‐ Cruise flight level (CRZ FL)
‐ Gross weight (GW)
‐ Wind and temperature models
‐ Performance factor.
The computer processes the ECON SPDs for the climb and descent phases before the initiation of
the flight phase, and freezes the values once the flight phase becomes active.
When there is no time or speed constraint/limit, ECON SPEED is the optimum speed for the
selected cost index. It refers to fuel and time cost and not directly to fuel saving.
The FM calculates ECON CLB, ECON DES and the associated top of climb and top of descent as
a function of cost index, cruise FL, and meteo data.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
PERFORMANCE - OPTIMIZATION
A318/A319/A320/A321 FLEET DSC-22_20-40-10 P 3/16
FCOM 19 AUG 10
The computer continually updates ECON CRUISE MACH (SPD), taking into account current
weather conditions and modifications to the flight plan.
Note: If the cruise FL is below FL 250, ECON CRUISE SPEED is computed.
If the cruise FL is above FL 250, ECON CRUISE MACH is computed.
PRESET TARGET SPEED FOR CLB PHASE
The flight crew can preselect the climb speed before the CLB phase begins, by inserting a
speed in the SPD field:
The active mode field changes from ECON to SPD XXX (XXX being the speed entered in the
SPD field), and the FM will use the entered speed for climb predictions computation.
The flight crew can revert to managed mode by pressing the 3L key.
PRESET TARGET SPEED/MACH FOR DES PHASE
The flight crew can change the speed and/or Mach displayed in the ECON field before the DES
phase begins by inserting a speed and/or Mach in the ECON field. The 3L field name changes
from ECON to AUTO SPD.
Although the entered speed is chosen by the flight crew, the FMGS uses it to compute the
descent flight path and top of descent. It is therefore part of the managed descent profile.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
PERFORMANCE - OPTIMIZATION
A318/A319/A320/A321 FLEET DSC-22_20-40-10 P 4/16
FCOM 19 AUG 10
The flight crew can revert to the optimum speed/Mach by clearing the 3L field.
OPTIMUM FLIGHT LEVEL
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機組操作手冊FLIGHT CREW OPERATING MANUAL 1(116)