曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

[ 6L ] TMPY F-PLN or
RETURN
The flight crew presses this key to return to the lateral revision page.
This field displays “TMPY-F-PLN” when a temporary flight plan is
created. It enables the temporary flight plan to be consulted.
[ 1R ] to [ 5R ] TO Displays the end point of the corresponding airways entered on the
[ 1L ] to [ 5L ] entries. The ending point is displayed in large blue font, if
manually-entered, in small blue font, if computed by the FMGC.
DEPARTURE PAGES
Applicable to:
,
,
MSN,,
4538,,
The flight crew can use the DEPARTURE pages to review departure procedures (RWY, SID,
TRANS), and enter them into the temporary flight plan.
When the display shows the lateral revision page for the origin, the flight crew calls it up by pressing
the 1L key.
The RWY, and, SIDS/enroute TRANS (if any) pages are available.
The flight crew sequentially calls up the SIDs and TRANS (if any) pages by selecting a runway on
the RWY page. The flight crew can also scroll between the RWY, SIDs and TRANS (if any) pages by
pressing the "←" or "→" key on the MCDU console.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 28/126
FCOM 19 AUG 10
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 29/126
FCOM 19 AUG 10
Line 1 RWY, SID TRANS This line displays the RWY, SID, and TRANS in green after they have
been inserted into the active flight plan, or in yellow if a temporary is
created or updated. If nothing has been selected or inserted, the line
displays dashes. “NONE” is displayed in the SID or TRANS field, if no
SID or TRANS exists, or NO SID or NO TRANS was selected by the
crew.
[ 2L ] RWY/SIDs to [ 5L ] These fields display selectable and selected RWYs or SIDs. The pilot
can scroll each list. Selectable RWYs and SIDs are displayed in blue
with an arrow.
Once a RWY or SID is selected, the arrow disappears.
A RWY or SID, already inserted in the flight plan, is displayed in green.
When a runway is selected, a temporary is created or modified, and the
DEPARTURE page 2 for SID selection is automatically displayed.
The display shows the length, course and, if available, the ILS ident
and frequency for each runway.
[ 6L ] TMPY F-PLN or
RETURN
The pilot presses this key to return to the temporary flight plan page, if
a temporary exists.
The display shows RETURN, instead TMPY F-PLN, when the pilot has
not created a temporary flight plan. Pressing this key reverts to the
LAT REV page.
[ 2R ] TRANS to [ 5R ] This field displays the selectable and selected enroute transitions in
blue and green respectively. They are blank, if there are no transitions.
When a TRANS is selected, a temporary is created or updated (if one
already exists).
[ 6M ] EOSID Once a runway is inserted into the flight plan, this field displays any
ENG OUT SID for that runway. If a temporary is created or updated,
the EOSID is displayed in yellow. Otherwise, it is displayed in green. If
there is none, it displays “NONE”.
HOLD PAGES
Applicable to:
,
,
MSN,,
4538,,
These pages allow the pilot to review and modify the holding pattern parameters at the selected
revise waypoint. The holding pattern data may come from the database, or may be defaulted to
standard dimensions.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 30/126
FCOM 19 AUG 10
The pilot calls up these pages by pressing the HOLD key on the LAT REV page for the waypoint.
The flight crew can insert database holds, hold computed by the FMS, or manually defined holds.
The page title is displayed in white, if no temporary flight plan exists, or in yellow if a temporary flight
plan is in progress. Hold parameters, IR and 2R fields are displayed in blue if no Temporary exists, or
in yellow if a temporary flight plan is in progress.
At first access, the HOLD page is displayed as follows :
If a hold can be inserted at the revised waypoint, [1L] displays ‐ blue brackets and [2L] and [3L]
display in blue the parameters of the FMS computed hold.
‐ Else, [1L], [2L] and [3L] display in green the parameters of the already existing hold that prevent
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機組操作手冊FLIGHT CREW OPERATING MANUAL 1(172)