曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

FCOM 19 AUG 10
WAYPOINT PAGE
The pilot can call up this page by pressing the 1L key on ‐ the DATA INDEX page. The display
then shows waypoint information associated with the identifier the flight crew inserts it in the
[ 1L ] field.
‐ With this page it is possible to call any waypoint not stored in the stored waypoint list, if they
belong to the active, temporary, or secondary flight plan.
STORED WAYPOINT PAGE
The pilot calls up this page by pressing the 1R key on the DATA INDEX page.
This page displays waypoints, defined and stored by the pilot. It lists each stored waypoint, along
with a number that shows the relative order in which it was inserted in the database. This number
is displayed in the upper righthand corner of the page. For example, “1/20” indicates that the
waypoint was the first of 20 stored.
Note: Latitude/Longitude crossing points and Abeam/Radial Intercept points are never included
in the stored waypoint list.
[ 1L ] IDENT To delete a waypoint, the pilot clears the 1L ident display.
[ 2L ] LAT/LONG Latitude and longitude of the waypoint are displayed in this field.
[ 3L ] This field either displays PLACE/BRG/DIST or PLACE-BRG/
PLACE-BRG or PLACE/DIST, depending on how the waypoint was defined.
[ 5R ] NEWWAYPOINT The pilot presses this key to call up the NEWWAYPOINT page.
[ 6R ] DELETE ALL The pilot presses this key and the label changes to amber CONFIRM DELETE ALL.
Pressing this key a second time deletes all the waypoints, stored by the flight crew,
except those currently used in the active or secondary flight plan. (“F-PLN ELEMENT
RETAINED” appears on the MCDU).
NEW WAYPOINT PAGE
The pilot calls up this page by pressing the 5R key ‐ on the STORED WAYPOINT page.
‐ The pilot can use this page to define and store up to 20 waypoints. Entering an additional
waypoint deletes the first one.
The pilot defines a waypoint by entering its ident in the data field next to 1L, then by entering its
position in the amber boxes.
The STORE prompt appears next to 6R when the boxes are filled in, and the pilot presses the
key to store the waypoint in the database.
If the pilot enters the waypoint's position as place/bearing/distance, or
place-bearing/place-bearing, the FMGC computes its latitude and longitude.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 45/104
FCOM 19 AUG 10
NAVAID/STORED NAVAID/NEW NAVAID PAGES
Applicable to:
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 46/104
FCOM 19 AUG 10
NAVAID PAGE
The pilot calls up this page by pressing the 2L key on the DATA INDEX page 2.
This page displays navaid information associated with the identifier the pilot inserts in the [ 1L ]
field.
[ 2L ] CLASS This field identifies the navaid as VOR, DME, VOR DME, VORTAC, NDB, LOC, ILS, MLS,
ILS/DME, MLS/DME, ILS/TAC or TACAN. It displays NON COLLOCATED, if the navaid is
uncollocated.
[ 4L ] FREQ or CHAN CHAN is displayed, if the class of navaid is an MLS or an MLS DME.
[ 5L ] ELV This field gives the navaid elevation in feet above sea level. It is not displayed for VOR or
NDB.
[ 6L ] FIG OF MERIT This field shows how far out the FMGS can autotune a VOR, VOR/DME, VORTAC, or
DME for display or for computing position.
0 : up to 40 nm
1 : up to 70 nm
2 : up to 130 nm
3 : up to 250 nm
[ 1R ] STATION DEC
or RWY IDENT
This is the magnetic declination in the navaid area (used only for VOR, VOR/DME, and
VORTAC).
The field displays RWY IDENT, if the navaid is a LOC, ILS, MLS, ILS/DME, MLS/DME or
ILS/TAC.
[ 2R ] CATEGORY This field shows the navaid's category, if it is an ILS, ILS/DME, MLS, MLS/DME or
ILS/TAC. A LOC DME has a category = 0.
[ 3R ] COURSE This is the localizer course, if the navaid is an ILS or a LOC.
[ 6R ] RETURN This prompt is displayed, if the page has been accessed from the SELECTED NAVAID
page. The pilot presses this key to return to the SELECTED NAVAID page.
STORED NAVAID PAGE
The pilot calls up this page by pressing the 2R key on the DATA INDEX page. This page is used to
display or delete defined and stored navaids.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 47/104
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機組操作手冊FLIGHT CREW OPERATING MANUAL 1(143)