曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(g) Remove the power control unit assembly [1].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-71
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Installation
Figure 401 (Sheet 1 of 4)/27-11-71-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-71
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Installation
Figure 401 (Sheet 2 of 4)/27-11-71-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-71
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Installation
Figure 401 (Sheet 3 of 4)/27-11-71-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-71
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Power Control Unit Installation
Figure 401 (Sheet 4 of 4)/27-11-71-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-71
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-11-71-400-801
3. Aileron Power Control Unit Installation
(Figure 401)
A. References
Reference Title
24-22-00-860-811 Supply Electrical Power (P/B 201)
27-11-00-700-809 Aileron Travel Test (P/B 501)
27-11-00-710-801 Aileron Response (Operational) Test (P/B 501)
27-11-00-820-802 Pogo and Power Control Unit (PCU) Adjustment (P/B 501)
27-11-00-860-802 Put the Aileron Hydraulic Systems A and B Back to the Condition
Before Pressure Removal (P/B 201)
29-11-00-860-801 Hydraulic System A or B Pressurization (P/B 201)
29-11-00-860-805 Hydraulic System A or B Power Removal (P/B 201)
B. Tools/Equipment
Reference Description
STD-203 Container - Oil Resistant, 1 U.S.-Gal (3.8 l)
C. Consumable Materials
Reference Description Specification
A00247 Sealant - Pressure And Environmental - Chromate
Type
BMS5-95
D00153 Fluid - Hydraulic, Erosion Arresting, Fire Resistant BMS3-11, Type
IV
(interchange~
able&
intermixable
with Type V)
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
1 Power control unit assembly 27-11-71-05-420 GUN 001-012, 101-108,
155-157, 201-999
2 Packing 27-11-71-01-375 GUN 155
27-11-71-06-530 GUN 001-028, 101-121,
155-157, 201-999
6 Packing 27-11-71-01-385 GUN 155
27-11-71-06-535 GUN 001-028, 101-121,
155-157, 201-999
13 Pin 27-11-71-05-110 GUN 001-012, 101-108,
155-157, 201-999
23 Pin 27-11-71-05-265 GUN 001-012, 101-108,
155-157, 201-999
37 Pin 27-11-71-05-315 GUN 001-012, 101-108,
155-157, 201-999
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-71
Page 407
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
E. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
211 Flight Compartment - Left
212 Flight Compartment - Right
F. Aileron Power Control Unit Installation
SUBTASK 27-11-71-420-001
(1) If they are not installed, install the union [3], union [5], new packing [2] and new packing [6]:
(a) Apply fluid, D00153 to the new packing [2] and new packing [6].
(b) Install the union [3], new packing [2] and union [5], new packing [6] in the ports on the
power control unit assembly [1].
SUBTASK 27-11-71-860-002
(2) Make sure the power control unit assembly [1] is filled with fluid, D00153.
SUBTASK 27-11-71-820-002
(3) Remove the 1 U.S.-gal (3.81 l) oil resistant container, STD-203.
SUBTASK 27-11-71-420-002
(4) Install the power control unit assembly [1]:
(a) Put the power control unit assembly [1] in its position.
(b) Install the bolt [34], washer [35], washer [39] and nut [38] to connect the power control unit
assembly [1] to the output lever assembly [36].
NOTE: Tighten the nut [38] to the lower end of the torque range. Continue to tighten the
nut until the next castellation aligns with the hole in the bolt [34].
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(9)