曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Rudder Installation
Figure 402 (Sheet 4 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 409
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Installation
Figure 402 (Sheet 5 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 410
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Installation
Figure 402 (Sheet 6 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 411
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Installation
Figure 402 (Sheet 7 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 412
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Installation
Figure 402 (Sheet 8 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 413
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-21-11-400-801
3. Rudder Installation
(Figure 401, Figure 402)
A. References
Reference Title
27-21-00-700-814-001 Rudder Hinge Bearing and PCU Bearing Freeplay (P/B 501)
27-21-00-700-814-002 Rudder Hinge Bearing and PCU Bearing Freeplay (P/B 501)
27-21-00-700-815-001 Rudder Centering Test (P/B 501)
27-21-00-700-815-002 Rudder Centering Test (P/B 501)
27-21-00-700-817-001 Rudder Travel Test (P/B 501)
27-21-00-700-817-002 Rudder Travel Test (P/B 501)
27-21-00-700-821-002 Rudder Hinge Friction Test (P/B 501)
27-21-00-700-823-001 Rudder Hinge Friction Test (P/B 501)
27-21-91-990-804-002 Figure: Main Rudder Power Control Unit Installation (P/B 401)
27-21-91-990-806-001 Figure: Main Rudder Power Control Unit Installation (P/B 401)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
COM-1550 Meter - Bonding
(Part #: C15292, Supplier: 01014, A/P Effectivity: 737-ALL)
(Part #: M1, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: M1B, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: MODEL 1010-A, Supplier: 3AD17, A/P Effectivity: 737-ALL)
SPL-2033 Sling - Rudder
(Part #: C27035-20, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Consumable Materials
Reference Description Specification
A00247 Sealant - Pressure And Environmental - Chromate
Type
BMS5-95
D00015 Grease - Aircraft Bearing BMS3-24
G01048 Lockwire - Corrosion Resistant Steel (0.032 In. Dia.) NASM20995~
C32
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
2 Pin 27-21-11-01-005 GUN ALL
22 Pin 27-21-11-01-005 GUN ALL
35 Pin 27-21-11-01-005 GUN ALL
43 Pin 27-21-11-01-005 GUN ALL
E. Location Zones
Zone Area
324 Vertical Fin - Rear Spar To Trailing Edge
325 Vertical Fin - Rudder
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 414
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
F. Rudder Installation
CAUTION: USE CAUTION WHEN YOU MOVE THE RUDDER. YOU CAN DAMAGE THE CONTROL
ROD IF IT CONTACTS THE VERTICAL STABILIZER.
SUBTASK 27-21-11-860-003
(1) Loosen all the seals at the trailing edge of the fin and move them fully forward.
SUBTASK 27-21-11-080-001
(2) Connect the sling, SPL-2033 to the RUDDER [1] (Figure 401).
SUBTASK 27-21-11-420-001
(3) Do these steps to put the RUDDER [1] in its position and connect the hinges:
(a) Apply a thin layer of grease, D00015 to the smooth surfaces of all the hinge bolts (outer
diameter), bushings (inner diameter), and bearings before you install them.
(b) Put the sling, SPL-2033 in its position and connect it to the RUDDER [1] (Figure 401).
(c) Lift the RUDDER [1] to its position on the vertical fin.
1) Use the ropes to make sure the rudder does not hit the airplane.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(81)