曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

or Standby Rudder Power Control Unit Deadband Test, TASK 27-21-00-700-818-002.
SUBTASK 27-21-24-710-002
(11) Do this task: Rudder Travel Test, TASK 27-21-00-700-817-001 or Rudder Travel Test,
TASK 27-21-00-700-817-002.
H. Put the Airplane Back to Its Usual Condition
SUBTASK 27-21-24-410-001
(1) Install this access panel:
Number Name/Location
324DL Trailing Edge Access
SUBTASK 27-21-24-410-003
(2) If it is necessary, do this task: Hydraulic Reservoir Servicing, TASK 12-12-00-610-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-24
Page 407
Feb 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
STANDBY RUDDER POWER CONTROL UNIT - INSPECTION/CHECK
1. General
A. This procedure contains these tasks:
(1) Standby Rudder Power Control Unit General Visual Inspection
(2) Standby Rudder Power Control Unit Detail Visual Inspection.
TASK 27-21-24-210-801
2. Standby Ruddder Power Control Unit (with Hydraulic Power on) General Visual Inspection
A. References
Reference Title
27-21-00-800-801 Rudder Hydraulic System A, B, or Standby Pressurization (P/B 201)
27-21-00-800-802 Remove Pressure from the Rudder Hydraulic Systems A, B, and
Standby (P/B 201)
B. Location Zones
Zone Area
325 Vertical Fin - Rudder
C. Access Panels
Number Name/Location
324DL Trailing Edge Access
D. Procedure
SUBTASK 27-21-24-010-003
(1) Open this access panel:
Number Name/Location
324DL Trailing Edge Access
SUBTASK 27-21-24-860-007
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, FLAPS, SPOILERS, LANDING GEAR AND THRUST REVERSERS CAN
MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURY
TO PERSONS AND DAMAGE TO EQUIPMENT.
(2) Pressurize the Standby Hydraulic System, do this task: Rudder Hydraulic System A, B, or
Standby Pressurization, TASK 27-21-00-800-801.
SUBTASK 27-21-24-210-001
(3) Do a general visual inspection of the standby rudder power control unit.
SUBTASK 27-21-24-860-006
(4) Remove pressure from the Standby Hydraulic System, do this task: Remove Pressure from the
Rudder Hydraulic Systems A, B, and Standby, TASK 27-21-00-800-802.
SUBTASK 27-21-24-410-004
(5) Close this access panel:
Number Name/Location
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-24
Page 601
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(Continued)
Number Name/Location
324DL Trailing Edge Access
------------------------- END OF TASK ---------------------------
TASK 27-21-24-210-802
3. Standby Ruddder Power Control Unit Detail Visual Inspection
A. Location Zones
Zone Area
325 Vertical Fin - Rudder
B. Access Panels
Number Name/Location
324DL Trailing Edge Access
C. Procedure
SUBTASK 27-21-24-010-004
(1) Open this access panel:
Number Name/Location
324DL Trailing Edge Access
SUBTASK 27-21-24-210-002
(2) Do a detail visual inspection of the standby rudder power control unit attachment points,
(Figure 601).
(a) Examine the attachment points for security and damage.
SUBTASK 27-21-24-410-005
(3) Close this access panel:
Number Name/Location
324DL Trailing Edge Access
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-24
Page 602
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Standby Rudder Power Control Unit Visual Inspection
Figure 601/27-21-24-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-24
Page 603
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
RUDDER PEDALS - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the rudder pedals
(2) An installation of the rudder pedals.
B. This procedure is applicable for the captain’s rudder pedals and first officer’s rudder pedals.
TASK 27-21-31-000-801
2. Rudder Pedals Removal
(Figure 401, Figure 402)
A. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(86)