曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUBTASK 27-21-11-020-002
(2) Lift the RUDDER [1] until the load is removed from its hinges.
SUBTASK 27-21-11-020-003
(3) Remove the nut [46], washers [45], and bolt [44] to disconnect the bonding jumper [47] from the
vertical fin at hinge 9 (Figure 402).
SUBTASK 27-21-11-020-004
(4) Disconnect the control rod of the rudder position transmitter from the vertical fin:
(a) Remove the bolt [23], washer [24], and washer [25].
(b) Disconnect the control rod.
SUBTASK 27-21-11-020-005
CAUTION: REMOVE THE CONTROL ROD FROM THE PCU BEFORE YOU DISCONNECT THE PCU
FROM THE RUDDER. IF YOU DO NOT REMOVE THE CONTROL ROD FIRST, DAMAGE
TO THE CONTROL ROD CAN OCCUR DURING THE CHECK.
(5) Do this step to disconnect the rudder main power control unit (PCU) from the RUDDER [1]:
GUN 001-005, 155-157, 201-999 PRE SB 737-27-1253
(a) Disconnect and remove the control rod (or rods) from the main PCU
(SeeFigure 27-21-91-990-806-001).
GUN 006-099, 101-122; GUN 001-005, 155-157, 201-999 POST SB 737-27-1253
(b) Disconnect and remove the control rod (or rods) from the main PCU
(SeeFigure 27-21-91-990-804-002).
GUN ALL
(c) Remove nut [15], washer [14], nut [13], washer [12], bushing [11], bolt [10], and bolt [9].
SUBTASK 27-21-11-020-006
(6) Do this step to disconnect the rudder standby power control unit (PCU) from the RUDDER [1]:
(a) Remove nut [29], washer [28], bushing [50], washer [27], and bolt [26].
SUBTASK 27-21-11-020-007
(7) Move the RUDDER [1] to the neutral position.
SUBTASK 27-21-11-020-008
WARNING: MAKE SURE THE CRANE WILL HOLD THE RUDDER IN A STABLE POSITION WHEN
YOU REMOVE THE HINGE BOLTS. ACCIDENTAL RUDDER MOVEMENT WHEN YOU
DISCONNECT IT FROM THE AIRPLANE CAN CAUSE INJURY TO PERSONS OR
DAMAGE TO EQUIPMENT.
(8) Remove the hinge bolts from the hinges:
(a) At hinges 1, 4, 5, 6, 8, and 9, remove the pin [35], nuts [34], washers [33], bushings [32],
washers [31], and bolts [30] from the hinges. Discard the pin [35].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 402
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) At hinge 2, remove the pin [2], nut [3], washer [4], spacer [5], bushing [6], washer [7], and
bolt [8] from the hinge. Discard the pin [2].
(c) At hinge 3, remove the pin [22], nut [21], washer [20], bushing [19], bushing [18], washer
[17], and bolt [16] from the hinge. Discard the pin [22].
(d) At hinge 7, remove the pin [43], nut [42], washer [41], washer [39], bushing [38], washer
[37], and bolt [36] from the hinge. Discard the pin [43].
SUBTASK 27-21-11-020-009
CAUTION: YOU MUST MOVE THE RUDDER UP BEFORE YOU MOVE IT BACK FROM THE
VERTICAL FIN. YOU CAN CAUSE DAMAGE TO THE RUDDER.
(9) Do these steps to remove the RUDDER [1]:
(a) Move the RUDDER [1] up and aft from the vertical fin and lower to the ground.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 403
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Sling Installation
Figure 401 (Sheet 1 of 2)/27-21-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 404
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Sling Installation
Figure 401 (Sheet 2 of 2)/27-21-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 405
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Installation
Figure 402 (Sheet 1 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 406
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Installation
Figure 402 (Sheet 2 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 407
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Installation
Figure 402 (Sheet 3 of 8)/27-21-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-11
Page 408
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(80)