曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(a) Adjust the length of the brake pushrods [11] if it is necessary.
SUBTASK 27-21-31-420-004
(9) Attach the pedal adjustment cable to the top cover [21] with a fastener.
SUBTASK 27-21-31-420-005
(10) Install the screws [25] to attach the outboard pedal shroud [19] to the stanchion wall.
SUBTASK 27-21-31-420-006
(11) Put the top cover [21] on the rudder pedal heel rests.
SUBTASK 27-21-31-420-007
(12) Install the screws [24] to attach the outboard pedal shroud [24] and inboard pedal shroud [19] to
the top cover [21].
SUBTASK 27-21-31-420-008
(13) Install the screws [22] and washers [23] to attach the top cover [21] to the rudder pedal heelrests.
SUBTASK 27-21-31-080-001
(14) Remove rig pins R-3 and R-4.
SUBTASK 27-21-31-080-002
(15) Remove rig pin R-1 or R-2.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-31
Page 410
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-21-31-730-001
(16) Do this task: Rudder Pedal Adjustment and Limit Travel Test, TASK 27-21-00-700-813-001 or
Rudder Pedal Adjustment and Limit Travel Test, TASK 27-21-00-700-813-002.
F. Put the Airplane Back To Its Usual condition
SUBTASK 27-21-31-410-001
(1) Close this access panel:
Number Name/Location
112A Forward Access Door
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-31
Page 411
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
RUDDER PEDAL ADJUSTMENT CRANK - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of a rudder pedal adjustment crank
(2) An installation of a rudder pedal adjustment crank.
B. The rudder pedal adjustment crank is referred to as the "crank assembly" in this procedure.
C. The crank assembly includes the crank lever [14] and cable [1].
D. The procedure is applicable for the captain’s and first officer’s crank assembly.
E. It is not necessary to remove the cable to remove the crank lever.
TASK 27-21-41-000-801
2. Rudder Pedal Adjustment Crank Removal
(Figure 401)
A. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
221 Passenger Compartment - Aft of Control Compartment to Forward
Entry Door - Left
222 Passenger Compartment - Aft of Control Compartment to Forward
Entry Door - Right
B. Access Panels
Number Name/Location
112A Forward Access Door
C. Prepare for the Removal
SUBTASK 27-21-41-010-001
(1) Open this access panel:
Number Name/Location
112A Forward Access Door
SUBTASK 27-21-41-010-002
(2) Open the main instrument panel shroud to get access to the cable.
SUBTASK 27-21-41-010-003
(3) Open the main instrument panel module assembly [14].
D. Crank Assembly Removal
SUBTASK 27-21-41-020-001
(1) Do these steps to remove the crank lever [10]:
(a) Remove the nut [8] and washer [9] from the crank lever [10].
(b) Remove the crank lever [10] from the bearing retainer [12].
(c) Remove the spacer [11].
SUBTASK 27-21-41-020-002
(2) Do these steps to remove the cable [1] from the crank lever [10]:
(a) Remove the lockwire from the cable retaining nut [13].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-41
Page 401
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) Loosen the cable retaining nut [13].
(c) Pull the cable [1] forward until it disconnects from the crank support bracket [7].
SUBTASK 27-21-41-020-003
(3) Do these steps to disconnect the cable [1] from the rudder jackshaft [4]:
(a) Loosen the retaining nut [3] at the rudder jackshaft [4].
(b) Hold the retaining nut [3] and pull the cable [1] from the rudder jackshaft [4].
(c) Remove the retaining nut [3] and washer [2].
SUBTASK 27-21-41-020-004
(4) Do these steps to remove the cable [1]:
(a) Remove the bolts [5] from the cable clamps [6].
(b) Remove the cable clamps [6] and keep a record of their locations.
(c) Remove the elastic grommet.
(d) Pull the cable [1] through the grommet hole.
(e) Remove the cable [1].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-41
Page 402
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(89)