曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

overhead panel.
SUBTASK 27-21-94-860-011
(4) Make sure the manual override lever on the rudder valve motor is in position 1.
SUBTASK 27-21-94-860-012
WARNING: KEEP PERSONS AND EQUIPMENT AWAY FROM THE RUDDER WHEN YOU SUPPLY
HYDRAULIC POWER. THE RUDDER CAN MOVE AND CAUSE INJURY TO PERSONS OR
DAMAGE TO EQUIPMENT WHEN YOU SUPPLY HYDRAULIC POWER.
(5) Put the FLIGHT CONTROL A or B switch to the STDBY RUD position.
SUBTASK 27-21-94-860-013
(6) Make sure the manual override lever on the rudder valve motor is in at position 2.
SUBTASK 27-21-94-710-002
(7) Push the rudder pedals until they touches the forward quadrant stops.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-94
Page 210
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(a) Make sure the rudder moves correctly.
NOTE: The rudder position indicator in the flight compartment will show you if the rudder
moves.
SUBTASK 27-21-94-790-001
(8) Make sure there is no hydraulic fluid leakage from the shutoff valve.
SUBTASK 27-21-94-860-014
(9) Put the FLIGHT CONTROL A or B switch to the ON position.
SUBTASK 27-21-94-860-015
(10) Make sure the manual override lever on the rudder valve motor is in position 1.
SUBTASK 27-21-94-860-019
(11) Do this task: Put the Rudder Hydraulic systems A, B, and Standby Back to the Condition
Before the Pressurization, TASK 27-21-00-840-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-94
Page 211
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
RUDDER HYDRAULIC FUSE - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the rudder hydraulic fuse
(2) An installation of the rudder hydraulic fuse.
TASK 27-21-95-000-801
2. Rudder Hydraulic Fuse Removal
(Figure 401)
A. References
Reference Title
27-21-00-800-802 Remove Pressure from the Rudder Hydraulic Systems A, B, and
Standby (P/B 201)
29-09-00-860-802 Hydraulic Reservoirs Depressurization (P/B 201)
29-11-01-860-802 Hydraulic Reservoirs Depressurization (P/B 201)
B. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
7 Rudder hydraulic fuse 29-11-52-14A-415 GUN 001-028, 101-121,
155-157, 201-999
C. Location Zones
Zone Area
311 Area Aft of Pressure Bulkhead - Left
D. Access Panels
Number Name/Location
311BL Stabilizer Trim Access Door
E. Prepare for the Removal
SUBTASK 27-21-95-860-001
(1) Do this task: Remove Pressure from the Rudder Hydraulic Systems A, B, and Standby,
TASK 27-21-00-800-802.
SUBTASK 27-21-95-860-002
(2) Release pressure from the hydraulic reservoirs. To release it, do this task: Hydraulic
Reservoirs Depressurization, TASK 29-11-01-860-802 or Hydraulic Reservoirs
Depressurization, TASK 29-09-00-860-802.
SUBTASK 27-21-95-010-001
(3) Open this access panel:
Number Name/Location
311BL Stabilizer Trim Access Door
F. Rudder Hydraulic Fuse Removal
SUBTASK 27-21-95-860-007
(1) Remove bolts [1] and [8], washers [2] and [9], nuts [3] and [10], and clamps [4] and [11]. Leave
clamp [11] around hydraulic line [6].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-95
Page 401
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-21-95-020-002
(2) Remove rudder hydraulic fuse [7].
(a) Disconnect the hydraulic line [5] and [6] from rudder hydraulic fuse [7].
(b) Remove the rudder hydraulic fuse [7].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-95
Page 402
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rudder Hydraulic Fuse Installation
Figure 401/27-21-95-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-21-95
Page 403
Feb 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-21-95-400-801
3. Rudder Hydraulic Fuse Installation
(Figure 401)
A. References
Reference Title
27-21-00-800-801 Rudder Hydraulic System A, B, or Standby Pressurization (P/B 201)
27-21-00-840-801 Put the Rudder Hydraulic systems A, B, and Standby Back to the
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊2(123)