曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

AutoCrs OFF = No // Switch Auto Cursor Function, one Down, to OFF
Font BOLD = Yes // Sets the Font to BOLD
Font WHITE = No // Sets the Font to WHITE instead of GREEN
# 6 = No // Future setting
# 7 = No // Future setting
[System Exceptions]
NO Oxygen Switch = No
NO IRS Selectors AFT = No
NO PWR/OVHT Test = No
NO FS-GEN-BUS = No
NO CTR-1/2 PumpCheck = Yes
A/C System = 737
 737 is used for the internal Checklist for B737.
 Any other is used for your own created Checklist, e.g. DC10. In this case the name of your own Checklist
file would be DC10.ini
Options
 Offset Hide, sets the program to Visible / Hide function by using the Offset 6DB3, Bit3 only
 TSR AutoBrk, sets the program to use the Offset 6DB1, 1 Byte length instead of the FS Offset
 NO FSUIPC, disables the use of FSUIPC and sets the program to Manual Check mode for all checklists
System Exceptions
 NO Oxygen Switch, there is NO Oxygen switch in your After Overhead panel connected so it is to check
manually
 NO IRS Selectors, there are NO IRS Selectors in your After Overhead panel connected so it is to check
manually
If there are Customer needs, more can be included !
www.technicalservicerichter.com Page 52
Program Control
The Control Panel can be placed somewhere on a different PC in your Network than the Electronic Checklist is
installed to control it as well by mouse, FSUIPC / WideFS connection is needed.
In Electronic-Checklist.ini file you need to set the following Option to YES.
[Options]
Offset Hide = Yes
Key Control
The used Keys to control the program on that PC where it is installed and the program has focus, are as follows.
 Cursor UP / DOWN, to go up and down in the menus
 ENTER
- to select the Checklist or on “” symbol to go to previous menu
- to CHECK manual selection in the Checklist
- to select in CLEAR CHECKLIST the Checklist (s) as deleted (cleared to UNCHECKED / TODO)
 SCROLL / LOCK, to HIDE / VISIBLE the Electronic Checklist on the screen
 “ESC” Key, to get into Windowed mode for move and resizing the panel. By pressing again “ESC” Key the
program switches back to normal screen
 CTRL  + “Q” Key, to close the program
Mouse Control
By using the mouse to control the program just click on the functions you want to.
Offset Control
Here are the used Offsets to control the program by hardware or direct from the FS-PC with FSUIPC Key or Button
(e.g. Joystick Buttons) programming.
 Cursor UP / DOWN  Offset 6DB3  Bit0 Cursor UP / Bit1 Cursor DN
 ENTER  Offset 6DB3  Bit2 Cursor ENTER
- to select the Checklist or on “” symbol to go to previous menu
- to CHECK manual selection in the Checklist
- to select in CLEAR CHECKLIST the Checklist (s) as deleted (cleared to UNCHECKED / TODO)
 SCROLL / LOCK,  Offset 6DB3, Bit3 = Checklist Visible / Hide
- to HIDE / VISIBLE the Electronic Checklist on the screen
 “ESC” Key, to get into Windowed mode for move and resizing the panel. By pressing again “ESC” Key the
program switches back to normal screen
 CTRL + “Q” Key, to close the program
www.technicalservicerichter.com Page 53
User Defined Checklists
This is an example of two user defined Checklists, TEST-1 and TEST-2.
www.technicalservicerichter.com Page 54
To create your own Checklist you need to follow exactly this regulate!!
You will find a base example file, User100.ini, in the main folder. The File name has to be changed in the Electonic-
Checklist.ini to your own created file name e.g.
A/C System = DC10
In this case the name of your own Checklist file would be DC10.ini
1. Line = number of checklist items (subfolders), here we use 3 (TEST-1, TEST-2 and TEST-3). Possible value
is 25, so there are 25 Checklists to define if needed.
2. Line = number of included lines for the first Checklist, this is needed for each Checklist! Here we use 5
because our first Checklist has 5 check items.
3. Line = number of included lines for the second Checklist, see above!
4. Line = number of included lines for the third Checklist, see point above 2.!
This lines 2. – 4. You have to do for all Checklists you want to define, e.g. you want define 5 Checklists with 4, 8,
20, 12 and 20 Check items, so you need to write the following in this first part
5  defines 5 Checklists
4  defines 4 Checklist items for the first Checklist
8  defines 8 Checklist items for the second Checklist
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料17(102)