(3)
Remove the DO-NOT-CLOSE tag and close this circuit breaker:

 (a)  
P180 DC Power Distribution Panel
 1) 180J25 AUTOBRAKE

 S 434-008
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-42-13
 ALL  ú ú 03 Page 403 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 724-017
 (4)  
Make sure that the AUTOBRAKE selector switch is set to the OFF position.

 S 724-010

 (5)  
Do these steps to do an operational test of the Brake System Control Unit (BSCU):

 (a)  
Make sure that the GND TESTS switch, on the Overhead Maintenance Panel, P461, or in the Main Equipment Center is in the ENABLE position.

 (b)  
Push the line select key that is adjacent to GROUND TESTS on an available Control Display Unit (CDU).

 (c)  
Push the line select key that is adjacent to 32 BRAKE SYSTEMS on the CDU.

 (d)  
Push the line select key that is adajcent to BRAKE SYSTEM BITE test on the CDU.

 (e)  
Push the line-select key that is adjacent to <START TEST.

 (f)  
Push the line-select key that is adjacent to CONTINUE twice on the CDU.

 (g)  
Make sure that the CDU display shows IN PROGRESS.

 (h)  
Make sure that the CDU display shows NO ACTIVE BRAKE SOURCE ACCUMULATOR ACTIVE.

 (i)  
Push the line-select key that is adjacent to CONTINUE on the CDU.

 (j)  
Make sure that the CDU display shows NO POWER TO A/B.

 (k)  
Push the line-select key that is adjacent to CONTINUE on the CDU.

 (l)  
Make sure that the CDU display shows SYSTEM TEST COMPLETED.

 (m)  
Push the line-select key that is adjacent to RETURN on the CDU to go back to the Ground Test Menu page.

 NOTE: A FAIL message may appear adjacent to <BRAKE SYSTEM
____
 BITE.

 S 724-011
 (6)  
Do these steps to do a test of the right brake pedal switch:

 (a)  
Push the line-select key that is adjacent to BRAKE SYSTEM BITE test on the CDU.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-42-13
 ALL  ú ú 02 Page 404 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 
747-400 
MAINTENANCE MANUAL
 (b)  Push the line-select key that is adjacent to <START TEST.
 (c)  Push the line-select key that is adjacent to CONTINUE on the
 CDU.
 (d)  Push the pilot's right brake pedal to the stop.
 (e)  Push the line-select key that is adjacent to CONTINUE on the
 CDU.
 (f)  Make sure that the CDU display shows RIGHT BRAKE PEDAL SWITCH
 DEPRESSED.
 (g)  Release the right brake pedal.
 (h)  Push the line-select key that is adjacent to RETURN on the CDU
 to go back to the Ground Test Menu page.
 NOTE:____ A FAIL message may appear adjacent to <BRAKE SYSTEM
 BITE.

 S 724-012
 (7)  
Do these steps to do a test of the left brake pedal switch:

 (a)  
Push the line-select key that is adjacent to BRAKE SYSTEM BITE test on the CDU.

 (b)  
Push the line-select key that is adjacent to <START TEST.

 (c)  
Push the line-select key that is adjacent to CONTINUE on the CDU.

 (d)  
Push the pilots' left brake pedal to the stop.

 (e)  
Push the line-select key that is adjacent to CONTINUE on the CDU.

 (f)  
Make sure that the CDU display shows LEFT BRAKE PEDAL SWITCH DEPRESSED.

 (g)  
Release the left brake pedal.

 (h)  
Push the line-select key that is adjacent to RETURN on the CDU to go back to the Ground Test Menu page.

 NOTE: A FAIL message may appear adjacent to <BRAKE SYSTEM
____
 BITE.

 S 864-016
 (8)  
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 7(90)