EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-45-01
 ALL  ú ú 03 Page 406 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (3)  17PRE65B00161 - Axle Thread Protecter
 NOTE: This tool is optional to G32008-1
____
 (4)  
G32008-1 - Axle Thread Protector

 B.
Standard Tools and Equipment

 (1)  
Wheel Change Dolly - Commercially Available

 C.
Parts

 ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401  |  1 | Wheel | 32-45-01 | 02 | 65 | | | 5 | Washer | 32-13-11 | 01 | 110 | | | 6 | Axle Nut | | | 105 | | | 8 | Lock Bolt | 32-45-01 | 02 | 51 | | | 9 | Washer | | | 56 | | | 11 | Clamp | 32-45-03 | 05 | 10 | | | 12 | Hubcap | | | 45 | 2......…........…...................................…..........….......….......1
 D. Consumable Materials
 (1)  
D00378 Grease - Aeroshell 22, (preferred)

 (2)  
D00165 Grease - Mobil 28, (optional)

 (3)  
D50005 Grease - Mobil Aviation Grease SHC 100
 (optional)

 (4)  
D00388 Grease - Aeroshell 5 (Optional lubricant
 for use on the axle and the brake
 mounting bushings only)

 E.
References

 (1)  
AMM 07-11-03/201, Jacking Airplane Axle

 (2)  
AMM 09-11-00/201, Towing

 (3)  
AMM 12-15-06/301, Tires

 (4)  
AMM 24-22-00/201, Manual Control

 (5)  
AMM 32-00-30/201, Landing Gear Door Locks

 (6)  
AMM 32-11-32/401, Wing Landing Gear Axle Sleeve

 (7)  
AMM 32-13-26/401, Body Landing Gear Axle Sleeve

 (8)  
AMM 32-45-03/601, Wheels

 (9)  
AMM 32-45-04/601, Tires

 F.
Access

 (1)  
Location Zones
 755 Body Landing Gear - LH
 765 Body Landing Gear - RH
 735 Wing Landing Gear - LH
 745 Wing Landing Gear - RH

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-45-01
 ALL  ú ú 03 Page 407 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 G. Prepare for the Installation
 S 864-020
 (1)  Make sure the ground locks are installed in all landing gear (AMM 09-11-00/201).
 S 494-021
 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (2)  Do the applicable task: "Installation of the Door Locks on the Wing Landing Gear" or "Installation of the Door Locks on the Body Landing Gear" (AMM 32-00-30/201).
 S 164-096
 CAUTION: DO NOT USE CLEANING FLUIDS OR SOLVENTS TO REMOVE UNWANTED
_______ GREASE FROM THE AXLES WHERE A BRAKE IS INSTALLED. CONTAMINATION ENTERING THE BRAKE CAN RESULT IN DAMAGE TO THE CARBON HEATSINK.
 (3)
Use a rag to remove the unwanted grease from the axle (Fig. 401).

 S 164-072

 (4)  
Use a rag to remove the unwanted grease from the inner diameter of the brake between the outboard end and the inboard partition that has holes (Fig. 401).

 S 214-023

 (5)  
Examine the tire (AMM 32-45-04/601).

 (6)  
Examine the wheel (AMM 32-45-03/601).

 S 224-095

 (7)  
Examine the antiskid transducer drive components in the axle and hubcap for damage.

 S 224-029

 (8)  
Examine the axle sleeve at the bearing support area for wear (AMM 32-45-03/601).

 S 214-024
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 7(140)