(3)
Make sure the chocks are installed at all the wheels.
S 862-208
(4)
Remove the pressure from hydraulic systems No. 1 and 2 and the reservoirs (AMM 29-11-00/201).
S 842-209
(5)
Release the parking brake.
D.
Remove the Hydraulic Fuse (Alternate Antiskid Module) (Fig. 204)
S 492-083
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-42-02
ALL ú ú 01 Page 222 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
BULKHEAD
(1350)
BULKHEAD
(1480)
ALTERNATE BULKHEAD
ANTISKID (1240)
MODULE
SEE A
FWD
ANTISKID MODULE
1.
RETAINER
2.
O-RING
1. RETAINER
3. SCREW (4 LOCATIONS)
6. FUSE
4.
O-RING
5.
UNION
HYDRAULIC LINE
ALTERNATE ANTISKID MODULEA
Alternate Antiskid Module - Hydraulic Fuse Figure 204
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-42-02
ALL ú ú 01 Page 223 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
S 032-086
(1)
Disconnect the hydraulic line from the hydraulic fuse.
S 492-087
(2)
Install a plug on the hydraulic line.
S 022-088
CAUTION: BE CAREFUL TO KEEP CONTAMINATION OUT OF THE PORTS OF THE
_______ ANTISKID MODULE. CONTAMINATION CAN CAUSE A MALFUNCTION OF THE ALTERNATE ANTISKID MODULE.
(3)
Remove the four screws (3) and pull the hydraulic fuse (6) from the alternate antiskid module.
S 492-089
(4)
Install a plug in the hole in the alternate antiskid module.
S 032-090
(5)
Remove the retainers (1) and the O-ring (2) from the hydraulic fuse, and discard the O-rings.
S 032-091
(6)
Remove the union (5) from the fuse, and discard the O-ring (4).
TASK 32-42-02-422-092
9. Hydraulic Fuse (Alternate Antiskid Module) - Installation
_________________________________________________________
A. Consumable Materials
(1)
C00272 Hydraulic Fluid - BMS 3-11
B.
Parts
~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 204 | 1 | Retainer | 32-42-02 | 01 | 135 | | | 2 | O-ring | | | 130 | | | 3 | Screw | | | 125 | | | 4 | O-ring | | | 50 | | | 5 | Union | | | 65 | | | 6 | Fuse | | | 110 | 2......…........…...................................…..........…......…........1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-42-02
ALL ú ú 01 Page 224 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
C. References
(1)
AMM 29-11-00/201, Main Hydrualic Supply System
(2)
AMM 32-00-30/201, Landing Gear Door Locks
(3)
AMM 32-41-00/201, Brake Hydrualic Sytem
D.
Access
(1)
Location Zones
135 Wing Landing Gear Well - Left (Forward bulkhead, wing gear wheel well) Alternate Antiskid Module - Left Wing Gear
136 Wing Landing Gear Well - Right (Forward bulkhead, wing gear wheel well) Alternate Antiskid Module - Right Wing Gear
137 Body Landing Gear Well - Left (Aft bulkhead, body gear wheel well) Alternate Antiskid Module - Left Body Gear
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 7(45)
