12-21-21
 ALL  ú ú 01 Page 305 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500MAINTENANCE MANUAL
D
D
DRAG BRACE SPHERICAL BEARING CROSSBOLT HOLE
PIN
UPPER DRAG BRACE
BEARING/BOLT
PIN - UPPER DRAG STRUT
BMS 3-27 (3 LOCATIONS) 34
PIN - UPPER DRAG STRUT
3 POINTS D-D
3 WARNING:_______  USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27 (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
4 CAUTION: REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE LUBRICATED. IF YOU APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT CAN OCCUR.
8  APPLY BMS 3-27 (MASTINOX 6856K) TO PIN OUTSIDE DIAMETER, CROSSBOLT HOLE, KEYWAY, UNDERCUT AND THREADS.
Nose Landing Gear Lubrication
Figure 301 (Sheet 6)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-21-21
 ALL  ú ú 01 Page 306 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
E
UPPER DRAG BRACE
E
BOLT SHANK
BEARING/PIN
BUSHING/PIN (2 LOCATIONS) LOCK LINK
BOLT UNDERCUT
BOLT
BMS 3-27  BUSHING/BUSHING (2 LOCATIONS)
(3 LOCATIONS) BEARING
3459
SPHERICAL
DIAMETER  LOWER DRAG BRACE
BOLT
3 POINTS E-E
3 _______USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27 (MASTINOX 6856K).WARNING: IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
4 _______ REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE LUBRICATED. IF YOUCAUTION:APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT CAN OCCUR.
5 APPLY BMS 3-27 (MASTINOX 6856K) TO BOLT UNDERCUT, SHANK, THREAD RELIEF AND THREADS, FILLING ANY INTERNAL VOIDS IN THE IMMEDIATE AREA.
9 DO NOT APPLY BMS 3-27 (MASTINOX 6856K) TO OUTSIDE DIAMETER OF BUSHING. LOCK LINK MUST BE FREE TO ROTATE.
Nose Landing Gear Lubrication
Figure 301 (Sheet 7)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-21-21
 ALL  ú ú 01 Page 307 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500
MAINTENANCE MANUAL

SEE A
OUTER CYLINDER
BOLT UNDERCUT
BUSHING/BOLT BEARING/BOLT
(2 LOCATIONS)

BOLT
BMS 3-27
(1 LOCATION)

3 410
BEARING SPHERICALLOWER DRAG BRACE DIAMETER
BOLT
BOLT SHANK
BMS 3-27
(2 LOCATIONS)

BEARING/BOLT
3 410
3 POINTS
A
3 WARNING:_______  USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27 (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
4
_______CAUTION: REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE LUBRICATED. IF YOU APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT CAN OCCUR.
10 APPLY BMS 3-27 (MASTINOX 6856K) TO BOLT INSIDE FLANGE FACE, UNDERCUT, SHANK, THREAD RELIEF AND THREADS, FILLING ANY INTERNAL VOIDS IN THE IMMEDIATE AREA.
Nose Landing Gear Lubrication Figure 301 (Sheet 8)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-21-21
 ALL  ú ú 01 Page 308 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
F 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 SERVICING(93)