12-15-31
ALL ú ú 01 Page 306 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 863-006
(2) Slowly open the air valve nut two turns maximum.
NOTE: Fluid in the shock strut will start to foam immediately as
____ you reduce pressure to ambient. Deflate the shock strut slowly to prevent the fluid to leak through the air valve.
S 613-007
(3) Remove the foamed fluid and fill with fluid by one of the following methods:
(a) Flushing Method 1) Remove the seal cap of the check valve. 2) Connect the service cart to the drain tube of the check
valve. 3) Connect the hose to the air valve on top of the shock strut.
NOTE: The air valve must be fully open.
____
a) Put the other end of the hose to drain into the container.
4) Fill the shock strut with hydraulic fluid until the hydraulic fluid flows into the drain bucket. a) Continue to fill the shock strut until the hydraulic
fluid which flows into the drain bucket is free of bubbles.
5) On airplanes that do not use a fully formulated (shock strut) fluid, do the following steps. a) Remove the air valve from top of the shock strut and
remove approximately 1 pint of fluid.
CAUTION: YOU MUST MIX SHOCK STRUT FLUIDS THAT ARE NOT
_______ PRE-MIXED BEFORE YOU FILL THE STRUT. IF YOU POUR UNDILUTED LUBRIZOL DIRECTLY INTO A STRUT IT CAN SETTLE TO THE BOTTOM AND NOT MIX CORRECTLY. UNDILUTED LUBRIZOL CAN ALSO CAUSE THE STRUT SEALS TO SWELL AND SOFTEN.
CAUTION: YOU MUST MIX 1 PART LUBRIZOL 1395 WITH 10 PARTS
_______ MIL-H-6083 OR MIL-H-5606 TO DILUTE THE LUBRIZOL BEFORE YOU ADD IT TO THE STRUT. IF YOU DO NOT DILUTE LUBRIZOL BEFORE YOU ADD IT TO THE STRUT IT CAN CAUSE DAMAGE TO THE STRUT AND SEALS.
b) Put in 11 ounces of diluted lubrizol and add clean fluid.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-15-31
ALL ú ú 02 Page 307 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(b)
A
737-300/400/500MAINTENANCE MANUAL
c) Replace the air valve.Draining Method 1) Remove the check valve and drain the shock strut fully. 2) Remove the seal cap from the check valve. 3) Apply shock strut fluid to the threads of the check valve.
WARNING:_______ MAKE SURE THE ARROW ON THE CHECK VALVE POINTS TO THE
SHOCK STRUT WHEN YOU INSTALL IT. INCORRECT
INSTALLATION OF THE CHECK VALVE CAN CAUSE INJURY TO
PERSONS IF THE SEAL CAP IS REMOVED WITH THE SHOCK
STRUT PRESSURIZED.
4) Install the check valve at the bottom of the drain tube. 5) Turn the check valve until it contacts the bottom of the
drain tube. 6) Tighten the check valve 8 to 10 pound-feet torque. 7) Install the lockwire. 8) Connect the service cart to the check valve. 9) On airplanes that do not use a fully formulated (shock
strut) fluid, do the following steps.
a) Remove the air valve from the top of the shock strut.
CAUTION: YOU MUST MIX SHOCK STRUT FLUIDS THAT ARE NOT
_______ PRE-MIXED BEFORE YOU FILL THE STRUT. IF YOU POUR UNDILUTED LUBRIZOL DIRECTLY INTO A STRUT IT CAN SETTLE TO THE BOTTOM AND NOT MIX CORRECTLY. UNDILUTED LUBRIZOL CAN ALSO CAUSE THE STRUT SEALS TO SWELL AND SOFTEN.
CAUTION: YOU MUST MIX 1 PART LUBRIZOL 1395 WITH 10 PARTS
_______ MIL-H-6083 OR MIL-H-5606 TO DILUTE THE LUBRIZOL BEFORE YOU ADD IT TO THE STRUT. IF YOU DO NOT DILUTE LUBRIZOL BEFORE YOU ADD IT TO THE STRUT IT CAN CAUSE DAMAGE TO THE STRUT AND SEALS.
b) Put 11 ounces of diluted lubrizol and replace the air valve.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 SERVICING(66)
