20-53-41 Page 120-53-41 Page 2
R _________________________________2. Damage Check and Repair Procedure
R (Ref. Fig. 001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 011)
R
R ____NOTE : No repair by modification of the support or of the mounting point is
R permitted.
R - The standard procedure is to replace damaged or broken supports by new
R supports with the same P/N.
R - For some supports, if a new support with the basic P/N is not available
R you can install a new support with an alternative P/N but it is a
R temporary revision only, replace with a new cable support in accordance
R with the basic definition within 18 months but preferably at the next
R C-check.
R - Refer to the tables that follow to know the alternative P/Ns that you can
R use.
R - If there is a risk of mechanical interference or if there is not
R sufficient separation:
R - add spacers,
R - adjust the position of the support to prevent damage.
R Repair of cable supports - Table of No-Alternative Support P/Ns R
Figure 001
20-53-41 Page 3
R Table of Alternative Support P/Ns R ABS0355-01, ABS0355-02, ABS0731 Figure 002
20-53-41 Page 4
R Table of Alternative Support P/Ns R E0254-01, E0255-01, E0255-02, E0255-03 Figure 003
20-53-41 Page 5
R Table of Alternative Support P/Ns R E0343-01, E0420-03, E0435A01 Figure 004
20-53-41 Page 6
R Table of Alternative Support P/Ns R E0659-01, E0660-01 Figure 005
20-53-41 Page 7
R Table of Alternative Support P/Ns R E0661-21, E0661-22, E0661-23, E0661-24 Figure 006
20-53-41 Page 8
R Table of Alternative Support P/Ns R E0663-21, E0663-22 Figure 007
20-53-41 Page 9
R Table of Alternative Support P/Ns R E0664-01, E0664-02, E0664-03 Figure 008
20-53-41 Page 10
R Table of Alternative Support P/Ns R E0664-04, E0664-05 Figure 009
20-53-41 Page 11
R Table of Alternative Support P/Ns R E0675A01, E0675A02, E0675B01, E0675B02 Figure 010
20-53-41 Page 12
R Table of Alternative Support P/Ns
R NSA935501, NSA935504-01, NSA935504-02, NSA935504-03 Figure 011
20-53-41 Page 1320-53-42 Page 1
____________________________________________REPAIR OF CLAMPS - DESCRIPTION AND OPERATION
_______1. General
The clamps installed on aircraft have the following codes:
R - NSA5515
R - NSA5516
R - NSA935807
R - MS21919
R
R _______________________2. Damage Check and Repair
R _______CAUTION : MAKE SURE THAT YOU USE THE TYPE OF CABLE SUPPORT THAT IS
R APPLICABLE FOR THE AREA IN WHICH YOU INSTALL IT.
R ALWAYS REFER TO CHAPTER 20-33-XX TO KNOW THE FULL PN OF THE CABLE
R SUPPORT APPLICABLE FOR ITS ENVIRONMENT ON THE AIRCRAFT. IF YOU DO
R NOT USE THE CORRECT TYPE AND SIZE OF CABLE SUPPORT, DAMAGE TO THE
R CABLE BUNDLE CAN OCCUR.
R The standard procedure is to replace damaged or broken supports by new
R supports with the same P/N.
R If the new clamps with the basic P/N is not available the tables that follow
R gives the list of the alernative clamp P/N that you can use.
R (Ref. Fig. 001, 002)
R
R ____NOTE : Depending the area, the use of NSA5516 clamp instead of NSA935807
R clamp at the extremities of the convoluted can be allow. Because if
R for any reason, the convoluted conduits slides and escapes for the
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 4(88)
