曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 When a standard electrical item is damaged, do these steps: - Find the damaged cable and its identification (P/N, type, sensitive/EFCS) - Find and correct the cause(s) of the damage. - Examine the wire to find the type of damage. Refer to para. DAMAGE ASSESSMENT PROCEDURE and to fig. TABLE OF DAMAGE ASSESSMENT.
 ____NOTE : Be careful when you examine wires for apparent damage. The insulation on some wires is almost transparent and you can see the core if the outer coating is missing. The outer coating is only for identification (color, marking). If the outer coating is missing but the insulation material is not damaged: - there is no effect on the electrical properties of the wire. - repair is not necessary.
 - You can have one or more repair types: Refer to the repair classification and select the repair depending on the repair grade.

 

 Grade 0: no repair is necessary ( permitted damage).
 Grade 1: permanent repair.
 Grade 2: a check of the repair is necessary at each C-check.
 ( Refer to chapter 20-52-10 ).
 Grade 3: temporary repair only, replace with new wire in accordance 
R  with the basic definition within 20 months but preferably 
R  at subsequent C check.
 Grade 4: no repair is permitted ( replace the wire ).
 ____NOTE : The repair types are in order of priority.
 If you cannot do the lower-category repair type because the parts are
 not available, then you must do the subsequent higher-category repair
 type (example: start with "1A" and if you cannot do this repair type,
 then do "1B" and so on).
 - Refer to the applicable repair type. Refer to para. REPAIR PROCEDURE and
 to fig. REPAIR PROCEDURE TABLE.
 - Do the applicable repair type. Refer to para. REPAIR PROCEDURE, to fig.
 REPAIR PROCEDURE TABLE and for more data refer to chapter 20-53-29 GENERAL
 REPAIR PROCEDURE.
 ____NOTE : When the customer adds an item on the aircraft, he will give it a
 number from 9000 to 9999. 
R  Example: Repair of the cables. 
R  - Step 1: A FIN in the 9XXXVS series will identify the splice (for 
R  example 9001VS for the first splice that the customer installs on 
R  the aircraft). 
R  - Step 2: The customer will install a sleeve on each side of the 
R  splice with the 9XXXVS series number printed on it, in accordance 
R  with the splice FIN. 
R  - Step 3: The customer will raise a Customer Originated Change (COC) 
R  to include the identified VS in the WDM (AWM/ASM/AWL).
 _________________________4. Structure of the Chapters
 - Repair of Standard Cables (Ref. 20-53-21)
 - Repair of Screened Cables (Ref. 20-53-22) 
R  - Repair of Coaxial and Quad Cables (Ref. 20-53-23)
 - Repair of Thermocouple Cables (Ref. 20-53-24) 
R  - Repair of Aluminum Cables (Ref. 20-53-25)
 - Repair of Fire-Resistant Cables (Ref. 20-53-26)
 - Repair of EFCS and Sensitive Cables (Ref.20-53-27) 
R  - Repair of Optical Fiber Cables (Ref.20-53-28)
 - General Repair Procedure (Ref. 20-53-29)

 

 _____________________________________________________
REPAIR OF STANDARD CABLES - DESCRIPTION AND OPERATION
 _______1. General 
R  This chapter gives the technical requirements for repair of the single-core 
R  and 
R  multi-core unscreened cables: 
R
 - Single-Core Cables for Panels and Boxes, Low-Temperature 200 deg.C (392.00
 deg.F)
 These cables found only in panels or in boxes have P/Ns:
 E0260 BF
 NSA935041 BE
 - Single-Core or Multi-Core Cables, Unscreened, Low-Temperature 200 deg.C
 (392.00 deg.F)
 These cables installed on aircraft have P/Ns: 
R  E0261 or EN2266-003A CF, E0261 or EN2266-004A CF-C, E0261 or EN2266-005A 
R  CF-U 
R  E0264 or EN2266-003B PF 
R  E0266 or EN2266-003C QF 
R  E0268 or EN2266-003D RF
 NSA935012 AK/AKA/AKB
 NSA935246 PD
 NSA935388 QD
 NSA935393 RD
 - Single-Core or Multi-Core Cables, Unscreened, High-Temperature 260 deg.C
 (500.00 deg.F) 
R  This type of cables are divided into 3 sub-families: 
R  * Cables without coating, four insulation layers, these cables have P/Ns: 
R  NSA935131 or EN2854-003A DG 
R  * Cables without coating, these cables have P/Ns: 
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 4(70)