曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 5. Close-up________
 Subtask 56-31-11-410-050
 A. Installation of the Lining Panels
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Install the lining panel 831DZ, 841DZ (Ref. TASK 25-23-46-400-001).
 (3) Close the forward passenger/crew door 831 or 841 (Ref. TASK 52-10-00-410-001).
 Subtask 56-31-11-942-050
 B. Close Access
 (1) Remove the access platform(s).

 1EFF : ALL 1 56-31-11Page 408 1 1 Nov 01/00 1 1 1CES 1

 WINDOW - AFT PASSENGER/CREW DOOR - REMOVAL/INSTALLATION
_______________________________________________________ TASK 56-31-13-000-001 Removal of the Window of the AFT Passenger/Crew Door
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.45 m (11 ft. 4 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-46-000-002 Removal of the Door Linings at the AFT Passenger/Crew
 Doors 52-10-00-010-001 Opening of the Passenger/Crew Door 56-31-13-991-001 Fig. 401 56-31-13-991-002 Fig. 402
 3. Job Set-up
__________ Subtask 56-31-13-941-050
 A. Get Access
 (1) Put the access platform in position at zone 832 (842).
 1EFF : ALL 1 56-31-13Page 401 1 1 Feb 01/98 1 1 1CES 1

 Subtask 56-31-13-010-050

 B. Removal of Lining Panels
 (1)
 Open the AFT passenger/crew door 832 or 842 (Ref. TASK 52-10-00-010-001)

 (2)
 Remove the lining panel 832DZ 842DZ (Ref. TASK 25-23-46-000-002)

 4. Procedure
_________ Subtask 56-31-13-020-050
 A. Removal of the Window
 (Ref. Fig. 401/TASK 56-31-13-991-001, 402/TASK 56-31-13-991-002)

 (1)
 Remove the Window Assembly

 (a)
 Remove the screws (1) and the washers (2).

 (b)
 Remove the retainer (3) and the spacer (4).

 (c)
 Remove the window (5).

 

 (2)
 Disassembly of the Window

 (a)
 Remove the seal (9).

 (b)
 Remove the inner pane (8) and the outer pane (10).

 

 1EFF : ALL 1 56-31-13Page 402 1 1 Feb 01/98 1 1 1CES 1

 Window - Aft Passenger/Crew Door
 Figure 401/TASK 56-31-13-991-001
 1EFF :  ALL  1  56-31-13 Page 403 
1  1  Feb 01/98
 1  1
 1CES  1

 

 Window
 Figure 402/TASK 56-31-13-991-002
 1EFF :  ALL  1  56-31-13 Page 404 
1  1  Feb 01/98
 1  1
 1CES  1

 TASK 56-31-13-400-002

 Installation of the Window of the AFT Passenger/Crew Door
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft)

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
25-23-46-000-002  Removal of the Door Linings at the AFT Passenger/Crew Doors
 25-23-46-400-002  Installation of the Door Linings at the AFT
 Passenger/Crew Doors
 52-10-00-410-001 Closing of the Passenger/Crew Door
 56-31-13-991-001 Fig. 401
 56-31-13-991-002 Fig. 402
 56-31-13-991-003 Fig. 403

 3. Job Set-up
__________
 Subtask 56-31-13-860-050

 A. Aircraft Maintenance Configuration
 (1) Make sure that the lining panels are removed (Ref. TASK 25-23-46-000-002)
 1EFF : ALL 1 56-31-13Page 405 1 1 May 01/05 1 1 1CES 1
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(97)