1EFF : ALL 1 56-11-11Page 413 1 1 Aug 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-012 USA VV-P-236
Material No. 05-002 PURE MINERALVASELINE OR PETRO- LATUM (Ref. 20-31-00)USA MIL-P-8116
Material No. 08-052 Material No. 09-016 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)USA MIL-T-23397 AND/OR L-T-80B SELF ADHESIVEALUMINIUM TAPE (Ref. 20-31-00)USA MIL-PRF-81733D TYPE II CLASS B
CORROSION INHIBITING FILLET CONSISTENCY
Material No. 09-019 (Ref. 20-31-00)USA AMS 3267/3 LOW ADHESION CORROSION INHIBITING SEALANT
Material No. 09-053 (Ref. 20-31-00)
Material No. 11-003 FAST-CURING SEALANT FOR WINDSCREENS (Ref. 20-31-00)USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
30-42-00-710-001 Operational Test of the Windshield Anti-Icing and
Defogging
30-45-44-400-001 Installation of the Spray Nozzle
30-45-52-400-002 Installation of the Wiper Arm (306DM, 307DM)
56-10-00-110-001 Cleaning of the L/R Windshields
56-11-11-991-001 Fig. 401
56-11-11-991-002 Fig. 402
56-11-11-991-014 Fig. 404
56-11-11-991-015 Fig. 405
56-11-11-991-016 Fig. 406
56-11-11-991-003 Fig. 407
1EFF : ALL 1 56-11-11Page 414 1 1 Aug 01/05R 1 1 1CES 1
3. Job Set-up
__________ Subtask 56-11-11-860-050
A. Aircraft Maintenance Configuration
(1) Make sure that the access platform is in position. Subtask 56-11-11-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU LIGHTING/ICE AND STBY/COMP/LIGHT 1LF H04 121VU COM NAV/RADAR/1 5SQ1 K13
**ON A/C 051-099,
121VU COM NAV/RADAR/2 5SQ2 K14 **ON A/C ALL
122VU ANTI ICE/WINDOWS/R 4DG2 W14 122VU ANTI ICE/WHC/2 5DG2 W13 122VU ANTI ICE/WINDOWS/L 4DG1 X14 122VU ANTI ICE/WHC/1 5DG1 X13 123VU ANTI ICE/L/WHSLD 1DG1 AF10 123VU ANTI ICE/R/WHSLD 1DG2 AF03
Subtask 56-11-11-110-050
C. Preparation for the Installation
(1)
Clean the windshield housing and the retainers with CLEANING AGENTS (Material No. 11-003).
(2)
Apply COMMON GREASE (Material No. 04-012) with a brush on the mating surfaces of the windshield panel and in its housing.
1EFF : ALL 1 56-11-11Page 415 1 1 Aug 01/05R 1 1 1CES 1
R R R R R (3) Make sure that the fastener countersinks at the upper horizontal frame are correctly filled with sealant. If they are not, apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-053) to make the upper horizontal frame flat in the seal contact area. This will prevent pressure leaks. If you use a sealant different from the remaining sealant, you must first clean the fastener countersinks with CLEANING AGENTS (Material No. 11-003).
R R R NOTE : If you use PR1436GB-ND1/2 at 23deg.C, the application time is____ 1/2 hour and the cure time is 24 hours. If you use PR1436GB2-NA at 23deg.C, the application time is 2 hours and the cure time is 30 hours. If you use PR1436GB4-NA at 23deg.C, the application time is 4 hours and the cure time is 40 hours. If you use DAPCO 72 at 23deg.C, the application time is 1/4 hour and the cure time is 2 1/2 hours.
4. Procedure_________
Subtask 56-11-11-420-050
A. Installation of the Windshield Panel (Ref. Fig. 404/TASK 56-11-11-991-014)
WARNING : BE CAREFUL DURING THE REMOVAL/INSTALLATION OF THE WINDSHIELD TO_______ PREVENT INJURY TO PERSONS AND/OR DAMAGE. MAKE SURE THAT: -THERE ARE SUFFICIENT PERSONS FOR THE TASK. -YOU DO NOT CAUSE DAMAGE TO THE SEAL OR THE GLASS PLIES. THE WINDSHIELD IS HEAVY.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(18)
