曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 blocked with cabin equipment and furnishings, e.g. toilets, galleys, etc. 
R  2. Description___________ 
R  (Ref. Fig. 001) 
R  The dummy window is made up of light alloy plate, spacers and a seal. 
R  The dummy window is attached to the window frame with a retainer, eyebolts 
R  and nuts. An electrical bonding strap is installed at the inner aluminum 
R  alloy pane to prevent electromagnetic interferences. 
R

 1EFF : 301-399, 1 56-22-00Page 1 1 1 Aug 01/04 1 1 1CES 1

 Cabin Dummy Windows
 Figure 001
 1EFF :  301-399,  1  56-22-00 Page 2 
1  1  May 01/04
 1  1
 1CES  1

 

 DUMMY WINDOW - CABIN - REMOVAL/INSTALLATION
___________________________________________ TASK 56-22-13-000-001 Removal of the Dummy Window
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4.0 m (13 ft. 1 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-43-000-001 Removal of the Upper Sidewall Panel(s) 56-22-13-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 56-22-13-010-050
 A. Get Access
 (1)
 Put the access platform in position.

 (2)
 Remove the upper sidewall panels, as nessessary (Ref. TASK 25-23-43-000-001).

 1EFF : 301-399, 1 56-22-13Page 401 1 1 May 01/04 1 1 1CES 1

 4. Procedure
_________

 (Ref. Fig. 401/TASK 56-22-13-991-001) Subtask 56-22-13-020-050
 A. Removal:
 (1)
 Remove the nut (3) and the bonding strap (2) from the eyebolt (1).

 (2)
 Remove the nuts (7).

 (3)
 Remove the retainer (8).

 (4)
 Remove the dummy window (4) and the seal (5) from the window frame (6).

 1EFF : 301-399, 1 56-22-13Page 402 1 1 May 01/04 1 1 1CES 1

 Dummy Windows - Cabin
 Figure 401/TASK 56-22-13-991-001
 1EFF :  301-399,  1  56-22-13 Page 403 
1  1  May 01/04
 1  1
 1CES  1

 TASK 56-22-13-400-002

 Installation of the Dummy Window
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft)

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 09-018  USA AMS 3267/3
 CORROSION INHIBITING LOW ADHESION SEALANT
 (Ref. 20-31-00)

 Material No. 11-002  USA MIL-PRF-680
 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
 (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
25-23-43-400-001 Installation of the Upper Sidewall Panel(s)
 56-22-13-991-001 Fig. 401

 1EFF : 301-399, 1 56-22-13Page 404 1 1 May 01/05 1 1 1CES 1

 3. Job Set-up
__________
 (Ref. Fig. 401/TASK 56-22-13-991-001) Subtask 56-22-13-860-050
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the aircraft is in the same configuration as for the removal task.

 (2)
 Clean the window frame (6) with CLEANING AGENTS (Material No. 11-002).

 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(93)