2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)
 No specific access platform 4.50 m (14 ft. 9 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
56-11-12-991-053 Fig. 404
 56-11-12-991-054 Fig. 405

 3. Job Set-up
__________
 Subtask 56-11-12-941-057

 A. Get Access
 (1) Put the access platform in position in the zone 210 in front of the fixed window.
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-11-12Page 415 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Subtask 56-11-12-865-056

 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
 FOR 7DG1 122VU ANTI ICE/WINDOWS/L 4DG1 X14 122VU ANTI ICE/WHC/1 5DG1 X13 123VU ANTI ICE/L/WHSLD 1DG1 AF10
 FOR 7DG2 122VU ANTI ICE/WINDOWS/R 4DG2 W14 122VU ANTI ICE/WHC/2 5DG2 W13 123VU ANTI ICE/R/WHSLD 1DG2 AF03
 4. Procedure
_________
 Subtask 56-11-12-020-052
 A. Removal of the Fixed Window Panel (Ref. Fig. 404/TASK 56-11-12-991-053, 405/TASK 56-11-12-991-054)
 WARNING : BE CAREFUL DURING THE REMOVAL/INSTALLATION OF THE WINDOW TO
_______ PREVENT INJURY TO PERSONS AND/OR DAMAGE. MAKE SURE THAT: -THERE ARE SUFFICIENT PERSONS FOR THE TASK. -YOU DO NOT CAUSE DAMAGE TO THE SEAL OR THE GLASS PLIES. THE WINDOW IS HEAVY.
 (1) Removal of the lining panel (8).
 (a) Remove the lateral lining panel
R 1_FOR 7DG1 Remove the screws (3), loosen the fasteners (4) and remove the panel (5).
R 2_FOR 7DG2 Loosen the fasteners (1) and remove the panel 212KW.
 (b)
 Remove the screws (6) and the washers (7).

 (c)
 Loosen the fasteners (2).

 (d)
 Remove the lining panel (8).

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-11-12Page 416 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Fixed Windows - Inner Lining
 Figure 404/TASK 56-11-12-991-053

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-11-12Page 417 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Fixed Windows
 Figure 405/TASK 56-11-12-991-054

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-11-12Page 418 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 (2) Removal of the fixed window panel
 (a)
 Disconnect the sensor (11) from the receptacle (14).

 (b)
 Install blanking caps on the disconnected electrical connector.

 (c)
 Remove the screws (12).

 (d)
 Remove the fixed window panel (13).

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-11-12Page 419 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 TASK 56-11-12-400-002

 Installation of the Fixed Windows
 WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______ OPENED, SAFETIED AND TAGGED.
 1. Reason for the Job
__________________
 This procedure is applicable:
 -
to the acrylic windows (LUCAS/ACT supplier, P/N NH...)

 -
to the glass windows (PPG supplier, P/N NP...)

 -
to the glass windows (SPS supplier, P/N SPS...)

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002  USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
 Material No. 09-016  USA MIL-PRF-81733D TYPE II CLASS B CORROSION INHIBITING FILLET CONSISTENCY (Ref. 20-31-00)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(38)