(k)
Tighten the screw (15).
(l)
Install the washer (8) and the screw (9).
(m)
Tighten the screw (9).
(n)
Put the handle (6) in position.
(o)
Install the washer (20) and the screw (21).
NOTE : Do not tighten the screw (21) completely.
____
(p)
Install the washer (18) and the screw (19).
(q)
Tighten the screw (19) and (21).
(r)
Put the pencil holder assembly (7) in position.
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 458 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(s) Install the screw (5) and tighten it.
(2)
Installation of the lining panel (29) 211KC (212KC)
(a)
Install the duct (27) on the air outlet nozzle (22) and tighten the clamp (28).
(b)
Make sure that the seal (23) is in position on the lining panel
(29) 211KC (212KC).
(c)
Install the lining panel (29) 211KC (212KC) on the brackets (26).
(d)
Install the washers (25) and the screws (24).
(e)
Tighten the screws (24).
(f)
Lock the fastener (1).
(g)
Install the lining panels 211BC (212BC) and 211FC (212FC).
(3)
Installation of the lining panel (48) 211GW (212GW)
(a)
Attach the electrical cable (46) to the lining panel (48) 211GW (212GW).
(b)
Install the clamp (43), the washer (44) and the screw (45) on the support (47).
(c)
Tighten the screw (45).
(d)
Put the lining panel (48) 211GW (212GW) in position.
(e)
Lock the fasteners (42).
(f)
Install the washers (40) and the screws (41).
(g)
Tighten the screws (41).
(h)
Close the sliding window 8DG1 (8DG2) (Ref. TASK 56-12-11-410-001).
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 459 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Subtask 56-12-11-420-066
J. Installation of Component
(1)
Install the map table light (Ref. TASK 33-12-12-400-002). FOR 8DG1 41LE FOR 8DG2 42LE
(2)
Install the map table light rheostats (Ref. TASK 33-12-18-400-001). FOR 8DG1 39LE FOR 8DG2 40LE
Subtask 56-12-11-865-064
K. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1DG1, 4DG1, 5DG1, 1DG2, 4DG2, 5DG2, 5SQ1, 5SQ2.
Subtask 56-12-11-720-052
L. Test
(1) Do the test of the anti-icing and defogging system of the sliding windows. (Ref. TASK 30-42-00-710-001)
5. Close-up
________ Subtask 56-12-11-110-062
A. Cleaning
(1) Clean the sliding window 8DG1 (8DG2) (Ref. TASK 56-10-00-110-003) Subtask 56-12-11-942-061
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 460 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 051-099,
R TASK 56-12-11-000-002-A
R Removal of the Sliding Window Panel
R WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE_______
R OPENED, SAFETIED AND TAGGED.
R 1. Reason for the Job__________________
R This procedure is applicable to the glass windows (SPS supplier, P/N
R SPS...).
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific blanking caps
R No specific circuit breaker(s) safety clip(s)
R No specific 2 suction cups
R No specific access platform 3.5 m (11 ft. 6 in.)
R No specific access platform 4.50 m (14 ft. 9 in.)
R 98D56103002001 1 WRENCH, REMOVAL - SLIDING WINDOW
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(62)
