C. Closing
-action on the operating lever with the window in the open position unlocks the window. This releases the rack.
-pushing forward on the lever gradually closes the window
-at the end of travel, the transversal guide roller brings the window against the aircraft structure. The hooks engage on the locking pins. The operating lever is locked and prevents unwanted opening of the window.
1EFF : ALL 1 56-12-00Page 12 1 1 May 01/05 1 1 1CES 1
Sliding Window - Sliding Window Operation
Figure 003
1EFF : ALL 1 56-12-00 Page 13
1 1 May 01/05
1 1
1CES 1
SLIDING WINDOWS - INSPECTION/CHECK
__________________________________ TASK 56-12-00-220-001 R Detailed Inspection of the Window Seals WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1.
Reason for the Job
__________________
Refer to the MPD TASK: 561200-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific access platform 4.50 m (14 ft. 9 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
56-12-11-000-003 Removal of the Sliding Window Seal
56-12-11-000-004 Removal of the Retainer/Gasket Assembly
56-12-11-400-003 Installation of the Sliding Window Seal
56-12-11-400-004 Installation of the Retainer/Gasket Assembly
3. Job Set-up
__________
Subtask 56-12-00-010-050
A. Get Access
(1)
Put the access platform in position at the zone 210 in front of the sliding window.
(2)
Open the sliding window.
1EFF : ALL 1 56-12-00Page 601 1 1 May 01/05 1 1 1CES 1
Subtask 56-12-00-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
**ON A/C 051-099,
121VU COM NAV/RADAR/2 5SQ2 K14
**ON A/C ALL
122VU ANTI ICE/WINDOWS/R 4DG2 W14 122VU ANTI ICE/WHC/2 5DG2 W13 122VU ANTI ICE/WINDOWS/L 4DG1 X14 122VU ANTI ICE/WHC/1 5DG1 X13 123VU ANTI ICE/L/WHSLD 1DG1 AF10 123VU ANTI ICE/R/WHSLD 1DG2 AF03
4. Procedure
_________
R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 56-12-00-220-050
A. Inspection
(1) For the acrylic sliding windows (LUCAS/ACT supplier, P/N NH...) and for the glass sliding windows (PPG supplier, P/N NP...):
(a)
Do a detailed visual inspection of the seal of the sliding window.
(b)
Make sure that there are no cracks and blisters on the seal.
(c)
If you find damage, remove (Ref. TASK 56-12-11-000-004) and replace (Ref. TASK 56-12-11-400-004) the retainer and gasket assembly.
1EFF : ALL 1 56-12-00Page 602 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 56-12-00Page 603 1 1 May 01/05 1 1 1CES 1
(2) For the glass sliding windows (SPS supplier, P/N SPS...):
(a) Do a detailed visual inspection of the seal of the sliding window.
(b) Make sure that there are no cracks and blisters on the seal.
(c) Examine the frame in the area of the seal.
(d) If you find damage, remove (Ref. TASK 56-12-11-000-003) and replace (Ref. TASK 56-12-11-400-003) the preformed seal.
R **ON A/C 051-099,
R Subtask 56-12-00-220-050-A
R A. Inspection
R (1) Do a detailed visual inspection of the seal of the sliding window.
R (2) Make sure that there are no cracks and blisters on the seal.
R (3) Examine the frame in the area of the seal.
R (4) Make sure that there is no distortion.
R R (5) If you find damage, remove (Ref. TASK 56-12-11-000-003) and replace (Ref. TASK 56-12-11-400-003) the preformed seal.
R **ON A/C ALL
5. Close-up________
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINDOWS 風擋 窗戶(46)
