(2)
 Write a report if you find damage during the inspection procedure.

 (3)
 If you find damage:

 (a)
 Refer to the ASRM (Ref. ASRM 51-11-00-001) for the classification of the damage.

 (b)
 If you find corrosion damage:

 -
refer to the ASRM (Ref. ASRM 51-22-00-001) for the general corrosion data

 -
refer to the ASRM (Ref. ASRM 51-74-00-001) for the repair of the corroded areas.

 (c)
 If you find other types of damage:

 -
refer to the ASRM (Ref. ASRM 51-73-00-001) for the repair of the minor damage

 -
refer to the ASRM (Ref. ASRM 53-31-11-101) for the allowable damage limits for this structure

 -
refer to the ASRM (Ref. ASRM 53-31-11-201) for the repair data for this structure.

R  EFF : 001-049, 051-099, 101-149, 151-199, 53-31-00Page A634 201-299, 401-499, Aug 01/05
 CES  CES  Subtask 53-31-00-410-073

R  **ON A/C 301-399, 
R  Subtask 53-31-00-220-053-B 
R  A. Special Detailed Inspection Procedure 
R  (1) Do the special detailed inspection of the lower skin of the 
R  longitudinal lap joints in the crack stopper areas. Do this at STGR6 
R  LH/RH, between FR35.8 and FR47, on the external surface (Ref. NTM 
R  533126-Part.6). 
R  (2) Write a report if you find damage during the inspection procedure. 
R  (3) If you find damage: 
R  (a) Refer to the ASRM (Ref. ASRM 51-11-00-001) for the classification 
R  of the damage. 
R  (b) If you find corrosion damage: 
R  - refer to the ASRM (Ref. ASRM 51-22-00-001) for the general 
R  corrosion data 
R  - refer to the ASRM (Ref. ASRM 51-74-00-001) for the repair of 
R  the corroded areas. 
R  (c) If you find other types of damage: 
R  - refer to the ASRM (Ref. ASRM 51-73-00-001) for the repair of 
R  the minor damage 
R  - refer to the ASRM (Ref. ASRM 53-31-11-101) for the allowable 
R  damage limits for this structure 
R  - refer to the ASRM (Ref. ASRM 53-31-11-201) for the repair data 
R  for this structure.
 **ON A/C ALL
 5. Close-up________
 Subtask 53-31-00-370-051
 A. Repair of the Surface Protection
 (1) If necessary, repair the paint coatings in the inspection areas
 (Ref. TASK 51-75-12-300-003) or (Ref. TASK 51-75-12-300-001).

 B. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the access platform(s).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 EFF : ALL 53-31-00Page A636

May 01/04
R
 CES  TASK 53-31-00-220-003

 Special Detailed Inspection of Upper Flange of Longitudinal Floor Beams at FR42 and FR46, as far as Visible
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 533110-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  abrasive cloth, grade 280
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power 53-32-12-000-002 Removal of the Cabin Floor Panels 53-32-12-400-002 Installation of the Cabin Floor Panels ASRM 51-11-00-001 ASRM 51-22-00-001 ASRM 51-73-00-001 ASRM 51-74-00-001
 EFF : ALL  53-31-00Page A637

May 01/04
R
 CES
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(76)