(2)
Put an ACCESS PLATFORM 2M (6 FT) in position below the FWD cargo-compartment door.
(3)
Remove the FWD cargo-compartment partitions 131NW, 131PW, 132PW (Ref. TASK 25-54-12-000-001).
EFF : 301-399, 53-22-14Page 414
Aug 01/05
R
CES 4. Procedure
_________
(Ref. Fig. 402/TASK 53-22-14-991-003) Subtask 53-22-14-020-051
A. Removal of the Maintenance Panels (1):
(1)
Remove the screws (2) and the countersunk washers (3).
(2)
Remove the maintenance panels (1).
EFF : 301-399, 53-22-14Page 415
Aug 01/05
R
CES
Maintenance Panels at Frame 35.5 Figure 402/TASK 53-22-14-991-003
R EFF : CES 301-399, 53-22-14 Page 416 Aug 01/05
TASK 53-22-14-400-002
Installation of the Maintenance Panels at Frame 35.5
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-064 USA MIL-W-5044 TYPE I ANTI-SLIP SURFACING (FLEX.) (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-54-12-400-001 Installation of the FWD Cargo Compartment Partition FR34 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 53-22-14-991-003 Fig. 402
EFF : 301-399, 53-22-14Page 417
Aug 01/05
R
CES 3. Job Set-up
__________ Subtask 53-22-14-860-051
A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft is in the same configuration as for the removal task.
4. Procedure
_________
(Ref. Fig. 402/TASK 53-22-14-991-003) Subtask 53-22-14-916-051
A. Preparation for Installation
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
(1)
Apply BONDING AND ADHESIVE COMPOUNDS (Material No. 08-064) to the maintenance panels (1), if necessary.
(2)
Clean the component interface and the adjacent area with CLEANING AGENTS (Material No. 11-004) and a clean cloth MISCELLANEOUS (Material No. 19-003).
(3)
Make sure that the parts retained from the removed component are clean and in the correct condition.
(4)
Do an inspection of the component interface and/or the adjacent area.
EFF : 301-399, 53-22-14Page 418
Aug 01/05
R
CES Subtask 53-22-14-420-051
B. Installation of the Maintenance Panels
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Put the maintenance panels (1) in the installation position.
(3)
Install the screws (2) with the countersunk washers (3).
(4)
TORQUE the screws (2) to 0.42 m.daN (37.16 lbf.in).
5. Close-up
________ Subtask 53-22-14-410-051
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the FWD cargo-compartment partitions 131NW, 131PW, 132PW (Ref. TASK 25-54-12-400-001).
(3)
Close the FWD cargo-compartment door (Ref. TASK 52-30-00-860-002).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(32)
