Cargo-Compartment Door
53-45-15-400-002 Installation of the Scuff Plates at the BULK
Cargo-Compartment Door
ASRM 53-41-11-101 (for corrective action)
53-41-00-991-009 Fig. 606
3. Job Set-up
__________
Subtask 53-41-00-010-077
A. Get Access
(1)
Put the access platform in position at the BULK cargo-compartment door.
(2)
Open the BULK cargo-compartment door (Ref. TASK 52-30-00-860-006).
R EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page 626 224-224, 228-228, May 01/05
CES
(3) Remove the scuff plate at the BULK cargo-compartment door (Ref. TASK 53-45-15-000-002).
4. Procedure
_________
(Ref. Fig. 606/TASK 53-41-00-991-009) Subtask 53-41-00-210-063
A. Inspection
(1) Examine the fuselage skin below the scuff plate for:
-corrosion,
-cracks,
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
the correct repair procedure.
5. Close-up
________ Subtask 53-41-00-410-076
A. Close Access
(1)
Install the scuff plate at the BULK cargo-compartment door (Ref. TASK 53-45-15-400-002).
(2)
Close the Bulk cargo-compartment door (Ref. TASK 52-30-00-860-008).
(3)
Remove the access platform(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page 627 224-224, 228-228, May 01/05
CES
Scuff Plate and Sealing Profile at the BULK Cargo-Compartment Door Figure 606/TASK 53-41-00-991-009
R EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page 628 224-224, 228-228, May 01/05
CES TASK 53-41-00-210-008
Special Detailed Inspection of Fuselage Skin of Bulk Cargo Door Cutout and Sealing Profile at Upper Corners
1. Reason for the Job
__________________
Refer to the MPD TASK: 534171-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific abrasive cloth, grade 280
No specific access platform 3 m (9 ft. 10 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
Composite Material 51-75-12-300-003 Repair of Minor Paint Damage (Topcoat Only) 52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-008 Close the Bulk Cargo-Compartment Door ASRM 51-11-00-001 ASRM 51-22-00-001 ASRM 53-41-11-101 NTM 534171-Part.6
R EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page 629 224-224, 228-228, May 01/05
CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
ASRM 51-74-00-001 (for corrective action) 53-41-00-991-010 Fig. 607
3. Job Set-up
__________
Subtask 53-41-00-010-078
A. Get Access
(1)
Put the access platform in position at the BULK cargo-compartment door.
(2)
Open the BULK cargo-compartment door (Ref. TASK 52-30-00-860-006).
Subtask 53-41-00-860-062
B. Preparation of the Inspection Area
(Ref. Fig. 607/TASK 53-41-00-991-010)
(1) Make sure that the surface of the inspection area is clean and smooth.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE
_______ THIS/THESE MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(141)
