(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-31-00Page 646
Feb 01/03
R
CES TASK 53-31-00-210-011
Detailed Visual Inspection of Skin around ADF-1 Antenna Cutout, between FR44 and FR45 and between Stringer 1, LH/RH, External Surface
1.
Reason for the Job
__________________
Refer to the MPD TASK: 533131-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
34-53-11-000-001 Removal of the ADF Loop and Sense Antenna
34-53-11-400-001 Installation of the ADF Loop and Sense Antenna
ASRM 53-31-11-101 (for corrective action)
53-31-00-991-012 Fig. 610
EFF : ALL
53-31-00Page 647
3. Job Set-up
__________ Subtask 53-31-00-010-061
A. Get Access
(1) Remove the ADF1 antenna 3RP1 (Ref. TASK 34-53-11-000-001). WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(2) Clean the area around the ADF1 antenna 3RP1 cutout with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________
(Ref. Fig. 610/TASK 53-31-00-991-012) Subtask 53-31-00-210-060
A. Inspection:
(1) Examine the area between the fuselage external skin around the ADF1 antenna cutout between FR44 and FR45 and STRG1 LH/RH for:
-corrosion,
-cracks,
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-31-11-101) for
____
the correct repair procedure.
EFF : ALL
53-31-00Page 648
Feb 01/03
R
CES
Skin Cutout of the ADF1 Antenna 3RP1 Figure 610/TASK 53-31-00-991-012
R EFF : CES ALL 53-31-00 Page 649 Feb 01/03
5. Close-up
________ Subtask 53-31-00-410-061
A. Close Access
(1)
Install the ADF1 antenna 3RP1 (Ref. TASK 34-53-11-400-001).
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-31-00Page 650
Feb 01/03
R
CES
TASK 53-31-00-210-012
Detailed Visual Inspection of Pressure Bulkhead FWD Face and the Pressure Deck Upper Surface, including connections to Center Wing Box
1. Reason for the Job
__________________
Refer to the MPD TASK: 533152-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
No specific access platform 1.8 m (5 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002 USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身2(57)
