-
the cargo door actuators retract andclose the cargo door.

On the cargo door:

-
the locking hooks engage with thelock fittings and lock the cargo doorin the closed position.

-
the force must be less than 18 daN (40.4656 lbf).

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 52-31-00Page 527 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------

R R  ACTION RESULT -------------------------------------------------------------------------------- push the door handle in the - the vent door closes, recess of the door structure - the lock of the cams block the and measure the force necessary latching hooks, with a SPRING BALANCE 20 DAN - the door handle is locked. (48 LBF). - the force must be less than 18 daN (40.4656 lbf). 
R  (5) Install the access panel 825AR. 
R  **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 52-31-00-720-057-A
 C. Clearance Check of the Latching Hooks (Ref. Fig. 501/TASK 52-31-00-991-001-A)
 (1) Open the cargo door (Ref. TASK 52-30-00-860-001) until it is in the vertical position.
 (2) Remove the access panel 825AR to get access to the latching hooks of the closed cargo door.
 (3) Set the selector of the control panel to the CLOSED position and hold it during the clearance check.
 NOTE : This operation is necessary to keep the cargo door in the____ fully closed position when it is not latched.
 (4) Do this test:
 NOTE : If necessary, adjust the position of the released latching____ hooks (Ref. TASK 52-31-11-820-002). 

R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-31-00Page 528 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
1. Between the cargo door and the cargo door sill: - measure the clearance between the rear of the latching hooks and the door sill structure. Between the cargo door and the cargodoor sill:- the minimum clearance must be 2.0 mm(0.0787 in.).
 - measure the clearance between the top of the latching hook and the roller of the latch fitting. - the minimum clearance must be 3.0 mm(0.1181 in.).
 (5) Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002) when the test is completed.
 (6) Install the access panel 825AR. 
R  **ON A/C 051-052, 
R  Subtask 52-31-00-720-057 
R R  C. Clearance Check of the Locking Hooks (Ref. Fig. 501A/TASK 52-31-00-991-001) 
R R  (1) Open the cargo door (Ref. TASK 52-30-00-860-001) until it is in the vertical position. 
R R  (2) Remove the access panel 825AR to get access to the locking hooks of the closed cargo doors. 
R R  (3) Set the selector of the control panel to the CLOSED position and hold it during the clearance check. 
R R  NOTE : This operation is necessary to keep the cargo door in the____ fully closed position when it is not locked. 
R  (4) Do this test: 
R R  NOTE : If necessary, adjust the position of the released locking____ hooks (Ref. TASK 52-31-11-820-002).

 1EFF : ALL 1 52-31-00Page 529 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
1. Between the cargo door and the  Between the cargo door and the cargo cargo door sill: door sill:
 -
measure the clearance between  - the minimum clearance must be 2.0 mm the rear of the locking hooks (0.0787 in.). and the door sill structure.

 -
measure the clearance between  - the minimum clearance must be 3.0 mm the top of the locking hook and (0.1181 in.). the roller of the lock fitting.

 (5)
 Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002) when the test is completed.

 (6)
 Install the access panel 825AR.

 **ON A/C 001-049, 053-061, 101-105, 201-203,
 Subtask 52-31-00-720-058-A
 D. Functional Test of the Proximity Switches 28WV, 30WV and 5MJ
 (Ref. Fig. 503/TASK 52-31-00-991-003-A)

 (1)
 Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002).

 (2)
 Remove the access panel 825AR to get access to the applicable proximity switches.

 (3)
 Do this test:

 NOTE : If necessary, adjust the clearance of
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門4(39)