-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
6. On the control panel:
-set the selector in the OPEN or CLOSE position.
7. On the FWD cargo door:
-Push the handle flap in and pull the door handle away and up to the UNLOCKED position.
8. On the control panel:
-set the selector in the CLOSE position.
9. On the FWD cargo door:
-examine the cargo door during the movement.
10. On the control panel:
-release the selector when the cargo door is fully closed.
11. On the FWD cargo door:
-move the door handle down to the LOCKED position.
-
the target lever of the switch mechanism moves inboards,
-
the target of the control lever is not in line with the proximity sensor.
On the FWD cargo door:
-
the cargo door must stay in the sameposition.
On the FWD cargo door:
-
the target lever of the switchmechanism moves outboards,
-
the target of the control lever is in line with the proximity sensor.
-
the latching hooks move to the unlocked position,
On the FWD cargo door:
-
the cargo door moves in the closedirection.
-when the cargo door is fully closed, the interlock mechanism does not block the latching shaft.
On the FWD cargo door:
-
the cargo door must close smoothlyand easily.
On the FWD cargo door:
-
the cargo door stays in the closedposition.
On the FWD cargo door:
-
the latching hooks engage with thelatch fittings,
-
the cargo door is in the fully closed position,
R 1EFF : 001-049, 053-061, 101-105, 201-203, 1 52-31-00Page 505 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the FWD cargo door:
- make sure that the cargo door is correctly latched and locked
- make sure that the vent door is correctly closed.
- examine the cargo door seal of the closed cargo door.
R **ON A/C 051-052,
R Subtask 52-31-00-710-050
R A. Do this test:
-
the vent door closes,
-
the drift pins extend in the pockets of the fuselage,
-
the latching handle is in line with the outer skin and locked.
On the lower ECAM DU:
-
the message CARGO goes off and the symbol for the FWD cargo door changes to green.
On the FWD cargo door:
-you can see the green mark on eachsafety cam through the indicationwindow.
-
the vent door seal touches the innersurface of the outer skin.
-
the door seal is compressed aroundits length.
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the FWD cargo door: On the FWD cargo door:
R - push the handle flap in and - the vent door opens inboards,
R pull the locking handle away - the drift pins retract from the
R from the cargo door. pockets of the fuselage,
R - you can see the red mark on each
R safety cam through the indication
R window.
R On the lower ECAM DU:
R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 52-31-00Page 506 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R R R
R
R R R R - turn the locking handle down to the UNLOCKED position.
R 2. On the control panel:
R R R - move the selector to the OPEN position and hold it.
R R - release the selector.
R R - set the selector in the OPEN position again and hold.
R R R R
R 3. On the FWD cargo door:
R R - examine the cargo door during the movement.
R 4. On the control panel:
R R - release the selector when the green indicator light is on.
R
R R - move the selector in the CLOSE direction and hold it.
-
the symbol of the FWD cargo door is shown in amber and the measage CARGO comes on.
On the FWD cargo door:
-
the locking hooks disengage from the lock fittings,
- 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門4(32)
