R 1EFF : ALL 1 52-30-00Page 251 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 52-30-00Page 252 1 1 May 01/05 1 1 1CES 1 1EFF : 001-049, 051-099, 101-105, 1 52-30-00Page 253 1 1 May 01/05 1 1 1CES 1 1EFF : 001-049, 051-099, 101-105, 1 52-30-00Page 254 1 1 Aug 01/05 1 1 1CES 1
R (5) Remove the access platform(s).
R R (6) Operate the crane so that the cargo door moves slowly down to its vertical position.
R R (7) Loosen the fastener of the sling (1) from the eye-end of the lower hoisting lug (2).
R R (8) Push the cargo door manually into the fuselage opening so that you can turn the locking handle.
R R (9) Turn the locking handle up to the LOCKED position and push it into the recess of the handle flap.
R R (10) Make sure that the green mark of each safety cam comes in view on the indication windows of the access panel 825AR or 826AR .
R **ON A/C ALL
5. Close-up________
Subtask 52-30-00-410-055
A. Removal the SLING - CARGO DOORS
(1) Remove the sling (1) from the crane.
(2) Remove the hoisting lug (2) from the lower hoist fitting (3).
(3) Install the plastic plug (4) in the lower hoist fitting (3).
R **ON A/C 001-049, 051-099, 101-105,
TASK 52-30-00-860-006
Open the Bulk Cargo-Compartment Door 1. Reason for the Job__________________ Self Explanatory 2. Job Set-up Information______________________ A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific spanner with a width across the flats of 28.5749 mm (1.125 in.) B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 001-003, 051-054,
R 52-30-00-991-004 Fig. 206 **ON A/C 004-049, 055-099, 101-105,
R 52-30-00-991-004-A Fig. 206A **ON A/C 001-049, 051-099, 101-105,
3. Job Set-up__________ Subtask 52-30-00-010-059
A. There is no special job set-up for this task.
4. Procedure_________
**ON A/C 001-003, 051-054,
(Ref. Fig. 206/TASK 52-30-00-991-004)
**ON A/C 004-049, 055-099, 101-105,
(Ref. Fig. 206A/TASK 52-30-00-991-004-A)
**ON A/C 001-003, 051-054,
Subtask 52-30-00-869-060
A. Opening of the Bulk Door
R R R CAUTION : MAKE SURE THAT THE DOOR HANDLE IS FLUSH WITH THE DOOR RECESS_______ BEFORE YOU MOVE IT INBOARD. THIS PREVENTS DAMAGE TO THE DOOR SKIN.
R R (1) To open the bulk cargo door from the outer side, push the button of the external door handle.
R R NOTE : This causes the external door handle to release from its____ recess.
(2) Move the internal or external door handle to the OPEN position.
R R (3) Push the bulk door inboard and put the door handle to the LOCKED position.
R R NOTE : If you used the external door handle, push it back into its____ recess.
R R (4) Move the bulk door manually inboard until the hook engages with the hook arrester of the fuselage crossbeam.
Bulk Door Operation
Figure 206/TASK 52-30-00-991-004
1EFF : 001-003, 051-054, 1 52-30-00Page 255 1 1 May 01/05 1 1 1CES 1
Bulk Door Operation Figure 206A/TASK 52-30-00-991-004-A
1EFF : 004-049, 055-099, 101-105, 301-399, 1 52-30-00Page 256 1 1 May 01/05 1 1 1CES 1 1EFF : 004-049, 055-099, 101-105, 1 52-30-00Page 257 1 1 Aug 01/05 1 1 1CES 1 1EFF : 001-049, 051-099, 101-105, 1 52-30-00Page 258 1 1 May 01/05 1 1 1CES 1 1EFF : 001-049, 051-099, 101-105, 1 52-30-00Page 259 1 1 Aug 01/05 1 1 1CES 1 1EFF : 004-049, 055-099, 101-105, 1 52-30-00Page 260 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 221-221, 224-224, 228-228,
**ON A/C 004-049, 055-099, 101-105,
Subtask 52-30-00-869-060-A
A. Opening of the Bulk Door
R CAUTION : MAKE SURE THAT THE DOOR HANDLE IS FLUSH WITH THE DOOR RECESS_______
R BEFORE YOU MOVE IT INBOARD.
R THIS PREVENTS DAMAGE TO THE DOOR SKIN.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門4(13)
