(1)
Clean the parts you removed with a brush and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003).
(2)
Clean the parts you removed with CLEANING AGENTS (Material No. 11-008A).
(3)
Dry the parts with dry compressed air.
(4) Install the O-ring seal (2). R (5) Install the new valve (3) valve (3) (referred to in this procedure as
R filling valve) on the damper and emergency operation cylinder (1). CAUTION : DO NOT APPLY MORE THAN THE SPECIFIED TORQUE TO THE SCREWS
_______ OF THE GUIDE. OVERTORQUE WILL CAUSE DAMAGE TO THE DIAPHRAGM AND WILL THUS CAUSE LEAKAGE OF NITROGEN FROM THE CYLINDER.
(6)
TORQUE the filling valve to 3 m.daN (22.12 lbf.ft).
(7)
Install the blanking plug (4) on the filling valve (3).
(8)
Fill the nitrogen bottle through the filling valve (3) to the correct pressure (Ref. TASK 52-10-00-614-001).
5. Close-up
________
Subtask 52-10-00-865-098
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 13WN, 15WN, 48WV
Subtask 52-10-00-942-077
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).
(3)
Close the passenger/crew door 831 (841) or 832 (842) (Ref. TASK 52-10-00-860-002).
1EFF : ALL 1 52-10-00Page 322 1 1 Nov 01/04 1 1 1CES 1
R (4) Remove the access platform(s).
1EFF : ALL 1 52-10-00Page 323 1 1 Aug 01/03 1 1 1CES 1 PASSENGER/CREW - DEACTIVATION/REACTIVATION
__________________________________________
TASK 52-10-00-040-001
Deactivation of the Passenger/Crew Doors - Load Adjustment
1. Reason for the Job
__________________
R Refer to the MMEL TASK: 25-60-02-A) R Emergency - Escape Slide/Slide Raft R Cabin Passenger Door
There is an alternative method for this procedure. This task gives one of the methods. For the other method refer to the other task in this page block.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific dynamometer, 20 da.N
No specific access platform 4.40 m (14 ft. 5 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
1EFF : ALL 1 52-10-00Page 401 1 1 May 01/04 1 1 1CES 1
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
25-23-46-000-001 Removal of the Door Linings at the FWD Passenger/Crew Doors 25-23-46-000-002 Removal of the Door Linings at the AFT Passenger/Crew
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(81)
