D. Removal of the Door-Damper and Emergency-Operation Cylinder
(1)
Remove the door-damper and emergency-operation cylinder, if not removed (Ref. TASK 52-11-14-000-001).
(2)
Remove the telescopic rod (Ref. TASK 52-11-14-000-002).
4. Procedure
_________
Subtask 52-11-14-220-050
A. Inspection of the Door-Damper and Emergency-Operation Cylinder (Ref. Fig. 602/TASK 52-11-14-991-010)
R (1) Do a detailed visual inspection of the bushings, the parts, the link R assemblies of the door-damper and emergency-operation cylinder.
(2) Make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | CC | | | | | | | | | OD2 | 15.882 | 15.893 | | | 15.870 | | | | | (0.6252)| (0.6257)| | | (0.6252)| | | | | | | 0.000 | 0.036 | | | 0.072 | | | | | (0.0000)| (0.0014)| | | (0.028)| | ID1 | 15.893 | 15.918 | | | | 15.942 | | | | (0.6257)| (0.6266)| | | |(0.6270) | | |--------|---------|---------|---------|---------|---------|---------|--------| | DD | | | | | | | | | OD4 | 12.983 | 12.994 | | | 12.965 | | | | | (0.5111)| (0.5116)| | | (0.5104)| | | | | | | 0.006 | 0.035 | | | 0.070 | | | | | (0.0002)| (0.0014)| | |(0.0028)| | ID3 | 13.000 | 13.018 | | | | 13.035 | | | | (0.5118)| (0.5125)| | | |(0.5132) | | |--------|---------|---------|---------|---------|---------|---------|--------| | FF | | | | | | | | | OD12 | 19.054 | 19.070 | | | 19.036 | | |
1EFF : ALL 1 52-11-14Page 608 1 1 Aug 01/00 1 1 1CES 1 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | | (0.7501)| (0.7507)| | | (0.7494)| | | | | | | 0.000 | 0.053 | | | 0.106 | | | | | (0.0000)| (0.0021)| | |(0.0042)| | ID13 | 19.070 | 19.107 | | | | 19.143 | | | | (0.7507)| (0.7522)| | | |(0.7536) | | -------------------------------------------------------------------------------
(3)
If the wear of the bushings (1) and (3) is not in the tolerances.
(a)
Replace the bushings (Ref. TASK 52-10-00-915-001).
(b)
Or replace the parts on which the bushings are installed.
(4)
If the wear of the bushings (13) is not in the tolerances and the link assembly (11) is worn or unserviceable.
R (a) Replace the door-damper and emergency-operation cylinder
R (Ref. TASK 52-11-14-000-001) (Ref. TASK 52-11-14-400-001) .
Subtask 52-11-14-220-051
B. Inspection of the Telescopic Rod Mechanism
(Ref. Fig. 603/TASK 52-11-14-991-009)
(1) Do a detailed visual inspection of the bushings and the parts of the telescopic rod mechanism.
1EFF : ALL 1 52-11-14Page 609 1 1 May 01/03 1 1 1CES 1
Door-Damper and Emergency-Operation Cylinder
Figure 602/TASK 52-11-14-991-010- 12 (SHEET 1)
1EFF : ALL 1 52-11-14 Page 610
1 1 Feb 01/98
1 1
1CES 1
Door-Damper and Emergency-Operation Cylinder
Figure 602/TASK 52-11-14-991-010- 22 (SHEET 2)
1EFF : ALL 1 52-11-14 Page 611
1 1 Feb 01/98
1 1
1CES 1
Telescopic Rod
Figure 603/TASK 52-11-14-991-009
1EFF : ALL 1 52-11-14 Page 612
1 1 Feb 01/98
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(159)
