(2)
 Install the door lining (Ref. TASK 25-23-46-400-001).

 (a)
 For the left door: 831FZ, 831CZ, 831DZ, 831AZ, 831BZ, 831EZ, 831GZ

 (b)
 For the right door: 841FZ, 841CZ, 841DZ, 841AZ, 841BZ, 841EZ, 841GZ

 (3)
 Install the door frame lining panels.

 (a)
 For the left door: 221AW, 221BW, 221CW, 221EW, 221FW, 221GW, 221HW, 221JW, 221KW 221LW, 221MW, 221NW, 221PW, 221QW, 231AW, 231CW (Ref. TASK 25-23-45-400-006).

 (b)
 For the right door: 222AW, 222BW, 222CW, 222EW, 222FW, 222GW, 222HW, 222JW, 222KW 222LW, 222MW, 222NW, 222PW, 222QW, 232AW, 232CW (Ref. TASK 25-23-45-400-007).

 (4)
 Install the escape slide (Ref. TASK 25-62-44-400-001).

 (5)
 Install the lining flap (Ref. TASK 52-11-31-400-001).

 1EFF : ALL 1 52-11-00Page 555 1 1 May 01/05R 1 1 1CES 1

R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 52-11-00-410-051-A
 C. Installation of the Components
 (1)
 Install the door insulation blankets.

 (2)
 Install the door lining panels (Ref. TASK 25-23-46-400-001).

 (a)
 For the left door: 831FZ, 831CZ, 831DZ, 831AZ, 831BZ, 831EZ, 831GZ

 (b)
 For the right door: 841FZ, 841CZ, 841DZ, 841AZ, 841BZ, 841EZ, 841GZ

 (3)
 Install the door frame lining panels.

 (a)
 For the left door: 221AW, 221BW, 221CW, 221EW, 221FW, 221GW, 221HW, 221JW, 221KW 221LW, 221MW, 221NW, 221PW, 221QW, 231AW, 231CW (Ref. TASK 25-23-45-400-006).

 (b)
 For the right door: 222AW, 222BW, 222CW, 222EW, 222FW, 222GW, 222HW, 222JW, 222KW 222LW, 222MW, 222NW, 222PW, 222QW, 232AW, 232CW (Ref. TASK 25-23-45-400-007).

 (4)
 Install the escape slide/raft (Ref. TASK 25-62-44-400-001).

 (5) Install the lining flap (Ref. TASK 52-11-31-400-001).
 **ON A/C ALL

 Subtask 52-11-00-410-060
 D. Close Access
 (1)
 Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).

 (2)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (3)
 Close the applicable passenger/crew door 831 or 841 (Ref. TASK 52-10-00-410-001) .

 1EFF : ALL 1 52-11-00Page 556 1 1 Aug 01/05 1 1 1CES 1

 (4)
 Remove the access platform(s).

 (5)
 Make sure that the work area is clean and clear of tool(s) and other items.

 Subtask 52-11-00-862-050
 E. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 1EFF : ALL 1 52-11-00Page 557 1 1 May 01/05R 1 1 1CES 1

 TASK 52-11-00-820-002
 Load Adjustment of the Control Handle of the FWD Passenger/Crew Door
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific dynamometer 20 daN (44.9617 lbf) 20 m.daN

 (147.4926 lbf.ft) No specific access platform 4.4 m (14 ft. 5 in.) 98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010  USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-46-000-001 Removal of the Door Linings at the FWD Passenger/Crew Doors 25-23-46-400-001 Installation of the Door Linings at the FWD
 Passenger/Crew Doors 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight
 (98D52103501000) for Escape Slide
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(122)