(4)
 Clean the surfaces with CLEANING AGENTS (Material No. 11-026).

 (5)
 If necessary, do the protection treatment and the paint coating repair on the cover plate with PRETREATMENT FOR PAINTING (Material No. 13-002) and STRUCTURE PAINTS (Material No. 16-001) (Ref. SRM 512111,P.Block-001) (Ref. SRM 517512,P.Block-001).

 (6)
 Use paper adhesive tapes to show the limits of the bonding areas on the cover plate.

 (7)
 Mix BONDING AND ADHESIVE COMPOUNDS (Material No. 08-018) with a spatula.

 1EFF : ALL 1 52-11-18Page 812 1 1 May 01/01 1 1 1CES 1

R R  FWD Passenger/Crew Door - Rubbing Strips Figure 805/TASK 52-11-18-991-007
 1EFF : 1 1 1CES  ALL  1 111 52-11-18 Page 813 May 01/00

R  (8) Use a brush to apply a thin and constant layer of BONDING AND 
R  ADHESIVE COMPOUNDS (Material No. 08-018) to the cover plate. 
R  (9) Use brush to apply BONDING AND ADHESIVE COMPOUNDS (Material No. 08-
R  018) to the neoprene side of the rubbing strip. 
R  (10) Let the adhesive cure until it is not tacky (evaporation of 
R  solvents). 
R  (11) Put the rubbing strip on the cover plate and make sure that it is in 
R  the correct position. 
R  (12) Apply pressure to all the surface of the rubbing strip. Make sure 
R  that there are no bubbles under the rubbing strip. 
R  (13) Remove the paper adhesive tapes. 
R  (14) Apply a bead of SEALANTS (Material No. 09-016) along the bottom edge 
R  of the rubbing strip. 
R  (15) For a better bonding, it is recommended to apply a constant pressure 
R  to all the surface of the rubbing strip during 24 hours. 
R  5. Close-up________ 
R  Subtask 52-11-18-942-055 
R  A. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) Obey the special precautions after the work on the door (Ref. TASK 
R  52-10-00-860-002). 
R  (3) Close the door 831 or 841 (Ref. TASK 52-10-00-410-001). 
R  (4) Remove the access platform(s).

 1EFF : ALL 1 52-11-18Page 814 1 1 May 01/00 1 1 1CES 1

 MECHANISM - DOOR LOCKING - REMOVAL/INSTALLATION
_______________________________________________ TASK 52-11-21-000-001 Removal of the Door Locking Mechanism
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific lint free cloth
 No specific access platform 3.5 m (11 ft. 6 in.)
 98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 1EFF : ALL 1 52-11-21Page 401 1 1 Feb 01/98 1 1 1CES 1 C. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
20-22-00-000-001 25-23-46-000-001
R  25-62-44-000-002 52-10-00-010-001 52-10-00-480-001
52-10-00-480-001
52-10-00-860-001
52-11-31-000-001 56-31-11-000-001
52-11-21-991-012 52-11-21-991-008 52-11-21-991-011 52-11-21-991-007 52-11-21-991-009 52-11-21-991-006 52-11-21-991-013 52-11-21-991-015 52-11-21-991-016 52-11-21-991-017 52-11-21-991-019 52-11-21-991-021 Removal of STA-LOK Nuts and LockwashersRemoval of the Door Linings at the FWD Passenger/Crew Doors Removal of the Escape-Slide Pack-AssemblyOpening of the Passenger/Crew DoorInstallation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape SlideInstallation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/RaftSpecial Precautions before Work on the Passenger/Crew DoorRemoval of the Lining FlapRemoval of the Window of the Forward Passenger/Crew DoorFig. 401Fig. 402Fig. 403Fig. 404Fig. 405Fig. 406Fig. 407Fig. 408Fig. 409Fig. 410Fig. 411Fig. 412
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(166)